check out the new remote control Jockey Wheel SmartBar Canegrowers rearview170 Cobb Grill Skid Row Recovery Gear
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Fixing solar panels to van roof


Senior Member

Status: Offline
Posts: 260
Date:
Fixing solar panels to van roof


In the very near future I intend to fix two 140 watt solar panels to the roof of my 2010 Jayco Sterling.

After looking at the roof it appears to have a layer of some type of plastic over the top what appears to be ply. In some areas this top layer is loose and therefore any thought of fixing the panel brackets with some type glue to the roof is not an option.
 
I have tried to find out of the ply is thick enough to take suitable screws without much luck.
 
Just hoping someone else has found a solution to fixing solar panels solidly on such a van roof.


__________________

I had a thought but it got run over as it crossed my mind.



Guru

Status: Online
Posts: 5679
Date:

I have Tom. Jayco Ballarat mounted a 120watt panel when we bought the van, and recently I needed to add another panel. I bought a 200 watt and mounted it on our 24' Sterling. I did have a thread here on the forum BUT cannot negotiate my way thru this forum to find it!!!nodisbelief I will get the ladder out tomorrow and take some pics to show how Jayco and myself achieved this.

Aussie Paul. smile



__________________


Senior Member

Status: Offline
Posts: 260
Date:

Thank Paul, that would be brilliant and very much appreciated.

__________________

I had a thought but it got run over as it crossed my mind.



Guru

Status: Online
Posts: 5679
Date:

Here we go Tom. You can find more solid beams near the roof openings. I used the roof where the top of the wall meets the roof, and more solid areas around the roof openings. I took some video as well so I will see if I can get that up.biggrin

Aussie Paul.smile



Attachments
__________________


Guru

Status: Online
Posts: 5679
Date:

Not sure if this will work BUT giving it a go.

Aussie Paul. smile

ps. nope, have to think of another waybiggrin

https://youtu.be/5ncbx5L59ZU

https://youtu.be/Z0jir4sWieY

-- Edited by aussie_paul on Saturday 28th of November 2015 05:49:53 PM



-- Edited by aussie_paul on Saturday 28th of November 2015 05:59:13 PM

__________________


Senior Member

Status: Offline
Posts: 199
Date:

Hi Tom,
I have a 2010 Jayco Sterling with 500w of solar fitted to the roof, I am going to add another 200 watts soon. I mounted the panels on aluminum angle with 1 screw per bracket to mount to the roof. The screws where 10mm long S/S screws. I used Sikaflex 11FC to attach the brackets to the roof and the screw was just to help hold the bracket down to the roof while the Sikaflex cured. Have traveled 20,000 klms since then and never had a problem. I did make certain that the holes for the screw had a bit of Sikaflex in them so I would not have a water leak problem.
The next lot of panels I am going to just glue the brackets straight on with some weights on them until the glue is cured. No screws at all.

__________________

On the road full time and loving it.



Senior Member

Status: Offline
Posts: 260
Date:

Thanks Paul that is great information and it's given me a lot more confidence that I can do the install myself without stuffing it up.

Also thank you Dav4Cris for your thoughts.

The one thing that concerned me the most was finding ares on the roof that would take a screw that would hold a bit of strain. Mainly because I noted that on the roof of my van the very top layer of the roof is not fixed solidly to the ply under it and therefore glue on its own was not going to be sufficient.

Thanks again guys.

__________________

I had a thought but it got run over as it crossed my mind.



Guru

Status: Offline
Posts: 7640
Date:

Check video's on youtube about re fixing top layer..

__________________
Whats out there


Senior Member

Status: Offline
Posts: 295
Date:

Tom
Make sure you use fixings that allow an air space under the panel(s) - they work more efficiently when air can circulate under them.

Glen

__________________

Glen

 

A diesel Nissan Pathfinder towing a Coromal Element 542.



Senior Member

Status: Offline
Posts: 161
Date:

I have 4 panels on my van roof totaling 500w.The panels are attached with aluminium right angle brackets that are attached using Sikaflex construction adhesive 11c.

 

I hope that this helps.

 

Regards Chris

 

 



__________________

Every one dies but not everyone lives!!!



Senior Member

Status: Offline
Posts: 260
Date:

Thanks to everyone for their valuable advice, with a bit of luck and weather permitting the job get done next week.

__________________

I had a thought but it got run over as it crossed my mind.

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook