Jarrah wrote:

---

Hi all, on the road camped up at Burra in SA The gas hot water system (Girard) was working fine last night but today is displaying E1 error code Plenty of gas in the gas bottle Would appreciate advice Thanks

---

 Hi Jarrah,

This is the link to the error codes but it could be a number of issues causing it.

https://www.girardendlessho****er.com.au/troubleshooting

Your manual too if you don't have one.

https://www.girardendlessho****er.com.au/_files/ugd/4f1865_76706129c55d496299bda1a673f7de18.pdf

If you have gas in the bottle it could possibly be the regulator or an air lock but first you need to check if there is an ignition spark.  Light your stove for a while to check that gas is flowing there as this will indicate if your regulator has issues his and may also remove any airlock.  If you do see an ignition spark I would wait a few minutes before attempts so that if it is an airlock at the water heater you will be gradually releasing the air.  Good luck.

Tim