check out the new remote control Jockey Wheel SmartBar Canegrowers rearview170 Cobb Grill Skid Row Recovery Gear
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Sizing Panels


Senior Member

Status: Offline
Posts: 381
Date:
Sizing Panels


How do I know what size fixed panels I have on the roof without taking them off . Also how do I check if one of the panels , are not working.

Cheers Mick 



__________________


Guru

Status: Offline
Posts: 7314
Date:

With ideal weather at the middle of the day. Measure the amps & voltage coming into the controller & calculate the angle of the sun & factor this in. Repeat a few times to average results.

The other option is measure the actual area of the solar cells themselves, not the overall panel, & use a conservative factor of say 130 watts per square metre. If the are new panels say 150 watts per square metre.



__________________

Procrastination, mankind's greatest labour saving device!

50L custom fuel rack 6x20W 100/20mppt 4x26Ah gel 28L super insulated fridge TPMS 3 ARB compressors heatsink fan cooled 4L tank aftercooler Air/water OCD cleaning 4 stage car acoustic insulation.



Guru

Status: Offline
Posts: 7314
Date:

Ideally they show be wired in, in such a fashion that you can measure each one individually, this could be wired in with individual switching. A DC clampmeter is a great tool to check everything.

IMG_3547.jpg



Attachments
__________________

Procrastination, mankind's greatest labour saving device!

50L custom fuel rack 6x20W 100/20mppt 4x26Ah gel 28L super insulated fridge TPMS 3 ARB compressors heatsink fan cooled 4L tank aftercooler Air/water OCD cleaning 4 stage car acoustic insulation.



Guru

Status: Offline
Posts: 1927
Date:

Hi Micksmile

I would measure the size of them and just look on the web for similar sized panels to get some idea of the power. Sometimes you might get a mobile to take a pic of the specs label by sliding it under.hmm

If you want to know if one is not working then assuming you have an indication of the power or amps of them all, get out in the bright high sun, cover the panels with thick blankets or similar, and uncover one at a time and see how they compare. Do not fall off the ladder though. wink

Obviously a clamp meter would be easier but only if the person who wired it left the wires available to get around individually and I have not seem that often. 

Jaahn

  

  



-- Edited by Jaahn on Wednesday 2nd of June 2021 02:43:42 PM

__________________


Guru

Status: Offline
Posts: 4375
Date:

Comparing them to others on the market is risky because many are severely overstated (and fraudulently so).
Unless they are particularly good (or bad) they will be about 150W/m2 under test conditions.
In full sun they will produce about 70% of that.
Covering or clamp meter or disconnecting one at a time is the only way to get a reasonable actual.
Cheers,
Peter

__________________

OKA196, 4x4 'C' Class, DIY, self contained motorhome. 960W of solar, 400Ah of AGMs, 310L water, 280L fuel. https://www.oka4wd.com/forum/members-vehicles-public/569-oka196-xt-motorhome
 

 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook