check out the new remote control Jockey Wheel SmartBar Topargee products Enginesaver Low Water Alarms Red Earth Festival Hammervan Park Booker
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Caravan boot lid removal


Veteran Member

Status: Offline
Posts: 52
Date:
Caravan boot lid removal


Does anyone know how to remove the front boot lid (golden eagle pop top) ?

I have removed the gas struts for replacement but cannot work out how to slide the lid off. 

I need to replace the shrunken plastic on the door front.

I have tried YouTube but only frustration resulted.

Can anyone help?

 

Smith



__________________


Guru

Status: Offline
Posts: 1060
Date:


I have carried out a remove years and years ago.

I would call your local caravan repairer ( mine would tell you how, also sell a 2nd hand or new boot lid)


From memory there are 3mm round 10mm long metal rods on each end that keep the lid in position.

I think I slightly opened up one end and tapped the top of the lid other end to remove the plug and the lid.

However I would NOT carry out the above without some Technical info from your local repairer.



-- Edited by PeterInSa on Monday 24th of February 2025 11:03:40 AM

__________________


Veteran Member

Status: Offline
Posts: 52
Date:


Managed to remove lid

Quite right there was a plug which knocked out easily.

All I have to do now is clean off the excess old glue and source some sort of new covering, I was thinking 1.6mm aluminium propeller plate.

Any thoughts ?




Smith



-- Edited by Smith on Monday 24th of February 2025 03:47:34 PM

__________________


Guru

Status: Offline
Posts: 1060
Date:

For $179 plus Freight you could consider a replacement

www.homeandrv.com.au/caravan-boot-door



-- Edited by PeterInSa on Monday 24th of February 2025 09:07:38 PM

__________________


Veteran Member

Status: Offline
Posts: 52
Date:

Thanks for the input
The problem is now solved

I have removed the lid, and replaced the old vinyl with new marine vinyl from clark rubber, aluminium sheet proved too difficult to source the small size I needed and would have required 2 by curved cuts, I have also replaced the old stabilise gas struts and guess what , the lid now stays open by itself.

The worst part of the job was removing the old contact adhesive used a number of products a lot of scraping and elbow grease until in desperation I tried off the shelf oven cleaner which worked a treat. Who would have thought ?

Mission successfully accomplished.


Smith

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook