check out the new remote control Jockey Wheel SmartBar rearview170 Beam Communications SatPhone Shop Topargee products
Members Login
Username 
 
Password 
    Remember Me  
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Drawbar A-frame
Post Info TOPIC: Drawbar A-frame
rodsfromday


Veteran Member

Status: Offline
Posts: 41
Date:
Drawbar A-frame
Permalink  

So I want to get the centre mount jockey wheel. My A-frame does not have the cross-section on it. So it would be okay if I took it in to get welded in?

The only other issue would be to reroute the handbrake cables as they currently first run down the centre and then out to the sides.

TIA



__________________
shakey55


Senior Member

Status: Offline
Posts: 203
Date:
Permalink  

I just removed my centre mount jockey wheel, I found it a pain. Replaced with a Ark xo750

If that is what you want, I cant see a problem having cross member welded. Just be careful with handbrake workings. 



-- Edited by shakey55 on Thursday 9th of November 2023 06:23:54 AM

__________________
shakey55
rodsfromday


Veteran Member

Status: Offline
Posts: 41
Date:
Permalink  

shakey55 wrote:

I just removed my centre mount jockey wheel, I found it a pain. Replaced with a Ark xo750

If that is what you want, I cant see a problem having cross member welded. Just be careful with handbrake workings. 



-- Edited by shakey55 on Thursday 9th of November 2023 06:23:54 AM

 I have fitted caravan movers so I thought it might be easier to move with a centre jockey wheel. I am looking at getting this. Had some good reviews.

 

Thanks



Attachments
CMJW350.webp (6.9 kb)
__________________
Possum3


Guru

Status: Offline
Posts: 8724
Date:
Permalink  

I find centre mounted jockey wheels difficult to attach and remove - wrist strength not as good as it used to be.

Welding draw bar "Will" void chassis warranty - The reasoning for this is the potential to "heat treat" the steel making it lose strength. If you consider welding in a cross member ensure it is done by a professional MTA technician, chassis repairer or Automotive Engineer (legal requirement) - it is not a handyman job.

__________________

Possum; AKA:- Ali El-Aziz Mohamed Gundawiathan

Sent from my imperial66 typewriter using carrier pigeon, message sticks and smoke signals.
rodsfromday


Veteran Member

Status: Offline
Posts: 41
Date:
Permalink  

Possum3 wrote:

I find centre mounted jockey wheels difficult to attach and remove - wrist strength not as good as it used to be.

Welding draw bar "Will" void chassis warranty - The reasoning for this is the potential to "heat treat" the steel making it lose strength. If you consider welding in a cross member ensure it is done by a professional MTA technician, chassis repairer or Automotive Engineer (legal requirement) - it is not a handyman job.

 I am looking at getting the jockey wheel thats permanently mounted. 

I have a good friend who is a qualified and very experienced welder to do it for me.



__________________
Craig1


Guru

Status: Offline
Posts: 4532
Date:
Permalink  

Just make sure you have adequate clearance when going through a dip or driveway then, so it does not scrape or bend.

__________________

Cheers Craig
rodsfromday


Veteran Member

Status: Offline
Posts: 41
Date:
Permalink  

Craig1 wrote:

Just make sure you have adequate clearance when going through a dip or driveway then, so it does not scrape or bend.

 Thanks will do



__________________
shakey55


Senior Member

Status: Offline
Posts: 203
Date:
Permalink  

rodsfromday wrote:
shakey55 wrote:

I just removed my centre mount jockey wheel, I found it a pain. Replaced with a Ark xo750

If that is what you want, I cant see a problem having cross member welded. Just be careful with handbrake workings. 



-- Edited by shakey55 on Thursday 9th of November 2023 06:23:54 AM

 I thought it might be easier to move with a centre jockey wheel.

 

Thanks

 I understand your thoughts, but will you ever push the caravan around by hand?



__________________
shakey55
rodsfromday


Veteran Member

Status: Offline
Posts: 41
Date:
Permalink  

shakey55 wrote:
rodsfromday wrote:
shakey55 wrote:

I just removed my centre mount jockey wheel, I found it a pain. Replaced with a Ark xo750

If that is what you want, I cant see a problem having cross member welded. Just be careful with handbrake workings. 



-- Edited by shakey55 on Thursday 9th of November 2023 06:23:54 AM

 I thought it might be easier to move with a centre jockey wheel.

 

Thanks

 I understand your thoughts, but will you ever push the caravan around by hand?

 No i have caravan movers fitted. 



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Drawbar A-frame
Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook