check out the new remote control Jockey Wheel SmartBar rearview170 Beam Communications SatPhone Shop Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: My Evolution Caravan


Member

Status: Offline
Posts: 10
Date:
My Evolution Caravan


disbeliefHi Gang, we have just purchased a 2012 Evolution Allure caravan and I am still trying to work out how to have power when off grid. We have two solar panels, two batteries, a Solarforce 3o AMP Solar controller, a Power Inverter, a CTEK MXS 25 charger etc... When I turn the 240V mains off, I have no power at all. What am I missing?

 



__________________
G C Gassin


Guru

Status: Offline
Posts: 8733
Date:

Welcome to GN's Gilo, Not familiar with you van type - most vans have an isolation switch (usually near door). the capacity of the batteries and the inverter are details you have omitted.

It is usual that lights, etc all run as 12volt units from battery - the charger and solar controller keeps the batteries powered. Microwave and other 240 volt gear must run off 240 volt switch or inverter.

__________________

Possum; AKA:- Ali El-Aziz Mohamed Gundawiathan

Sent from my imperial66 typewriter using carrier pigeon, message sticks and smoke signals.



Member

Status: Offline
Posts: 10
Date:

Hey Possum, I have sent a photo of the Inverter for you to have a look. 

 



Attachments
__________________
G C Gassin


Member

Status: Offline
Posts: 10
Date:

I'm not home at the moment and will check the batteries tomorrow. Cheers GG



__________________
G C Gassin


Guru

Status: Offline
Posts: 5388
Date:

Hi Gilo

I am also not familiar with your type of caravan

But

Most caravan/RV's have a switch somewhere between the batteries and 12 volt system
This is to ensure that if you park up (for a lengthy time), and accidently leave a light on, the batteries will not drain

The switch in my RV, looks like a normal light switch, and is situated near the 240 volt incoming power box, and was not marked

__________________

Tony

It cost nothing to be polite



Member

Status: Offline
Posts: 10
Date:

Hi guys, I have two new batteries now and hesitate to connect them before I am certain that the CTEK charger is working correctly. My question is, how do I check that the CTEK is working correctly?

__________________
G C Gassin


Guru

Status: Offline
Posts: 7579
Date:

I have never looked at ctek chargers. Maybe they have Bluetooth models like Victron. Then you have complete control on your phone.

 

Failing that, everyone should have a multimeter anyway, much easier to solve problems, especially if remote. Better still a DC clamp meter, they make checking amps a piece of cake.

 

 

Disclaimer: I have Victron 10amp & 30amp Bluetooth chargers & a Kyoritsu clamp meter, plus a few other multimeters.



__________________

Procrastination, mankind's greatest labour saving device!

50L custom fuel rack 6x20W 100/20mppt 4x26Ah gel 28L super insulated fridge TPMS 3 ARB compressors heatsink fan cooled 4L tank aftercooler Air/water OCD cleaning 4 stage car acoustic insulation.



Member

Status: Offline
Posts: 10
Date:

Thanks heaps for that. I guess I have to connect the new batteries and see what happens.

Cheers 

GG 

 



__________________
G C Gassin
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook