has anyone got a good idea how to get the power cord into a tent as mine has a floor .........without using the door .......is there a fitting to run the cord in maybe ............or is there a bright idea someone has ......cheers
We have a fully enclosed tent/screen enclosure, can't you sew in a flap with Velcro where needed. Probably about half hour job by hand with needle & thread. An hour at worst.
__________________
Procrastination, mankind's greatest labour saving device!
50L custom fuel rack 6x20W 100/20mppt 4x26Ah gel 28L super insulated fridge TPMS 3 ARB compressors heatsink fan cooled 4L tank aftercooler Air/water OCD cleaning 4 stage car acoustic insulation.
I think he doesn't want to trip over it, which may happen as he is an elderly gentleman, as well as he doesn't want to walk on it. As I am a bit younger I would feed it in thru the front door, up against the zippered part and around the other side of the tent wall, ( left or right side). These are the things you should bring up when you buy a tent, or any product, but doing this, is rather an afterthought until you put your tent up. You should be able to replace/ return the tent, with one that has a cord inlet , they can be a bit dearer, but as you have sold your van, you may have a little bit extra cash to to it.
-- Edited by Bicyclecamper on Monday 6th of June 2022 02:22:54 PM
solved the puzzle its a small area near the door that the cord goes into the tent thanks all for you ideas and help .....cheers from me maybe ill see you out there eh ......
if some clever person can put a picture of a Weisshorn tent-c-ca4 on here it has on the left of the door a slanted piece of canvas that the cord goes through behind and it velcroes shut...so as i posted all is goodo
