Trying to figure out away to hang Christmas tree LED lights around the van, The van is fiberglass composite sheeting. Tried the stick on hooks (tape), wont stick, polish must be ingrained in the glass, suction cups just slide down the walls. Maybe I have to Sika-flex some hooks in place.
Possibly Slugs. Small round plastic pieces that will slip into the sail track you use for your annexe or the extra slot in a roll out awning. These things are used to slot into the track on a sailboat mast to slide the sail up and down the mast. They have loops that attach the sail to the slug which then slot into the track.
If I can find a site on the net I will post the address on this post.
This a an Australian site and pretty much any place that sell sailing stuff deal with Ronstan. Different diameters so would depend on your sail track slot.
Hope this helps
-- Edited by Yuglamron on Tuesday 12th of December 2017 08:55:38 PM
Thanks Yuglamron, was hopping someone would have an idea for attaching to the walls, besides tek screws. Good idea though.
Dougwe you've been on the turps again, Alf was an alien creature in a movie wasn't he? you mean elf, or elves. The green suite would have to be illuminated, or you wouldn't see it at night.
Yes about to get myself a brandy, had my heart checked out to-day, apparently still breathing, so I shall shout myself a double.
Some velcro has an acidic adhesive and can leave a brown burn mark in the duco after removal. In my case I tried some Black velcro from Clark Rubber to hang some things up, now I have these brown patches that won't clean off.
__________________
Steve, Di & Ziggy We named our Motorhome "Roadworx" because on the road works "On The Road Again" Ford Transit with 302 Windsor V8 conversion, C4 Auto, 9 Inch Ford Diff All Lighting L.E.D., 260 Amp/h AGM, 530 Watt Solar + Kipor Backup Gen.
