check out the new remote control Jockey Wheel SmartBar rearview170 Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Embossed Aluminium Sheet in Perth
Post Info TOPIC: Embossed Aluminium Sheet in Perth
elliemike


Guru

Status: Offline
Posts: 1021
Date:
Embossed Aluminium Sheet in Perth
Permalink  

I am looking for some "Embossed Aluminium" Sheet 0.8 or 1 mm. thick.   I can get the 1.6 + mm. Treadplate (Propeller or 5 bar Plate patterns etc) aluminium no probs here in Perth. But I need something a thinner at 1 mm.  or 0.8 mm.   Haven't  be able to locate an outlet in Perth that stocks the Embossed Sheet.

Any Ideas  I, have tried "Capral" and a few other Aluminum places but no joy

I need a piece 2400x1200.  Propeller,5bar, pattern.

 

Regards

Mike 





-- Edited by elliemike on Saturday 17th of January 2015 06:32:39 PM

__________________

Mike & Ellie
justcruisin01


Guru

Status: Offline
Posts: 4206
Date:
Permalink  

I recently got a sheet from bunnings not very large maybe about 900x600.

JC.



__________________

 

 

Be your self; there's no body better qualified !                    "I came into this world with nothing , I still have most of it"

 

JC.

 


 

                                             

                

    

                          

elliemike


Guru

Status: Offline
Posts: 1021
Date:
Permalink  

justcruisin01 wrote:

I recently got a sheet from bunnings not very large maybe about 900x600.

JC.

 Yep they have that size but I need the 2400x1200



__________________

Mike & Ellie
Cruising Cruze


Guru

Status: Offline
Posts: 2138
Date:
Permalink  

I think that any sheetmetal workshop could help you further Mike



Good luck with the hunt


Cheers John

__________________
elliemike


Guru

Status: Offline
Posts: 1021
Date:
Permalink  

Cruising Cruze wrote:

I think that any sheetmetal workshop could help you further Mike



Good luck with the hunt


Cheers John

 
Thats why I am asking here  Iv'e been around a few but no luck so far.



__________________

Mike & Ellie
banjo


Senior Member

Status: Offline
Posts: 415
Date:
Permalink  

I bought my last lot (2 full sheets) from Capral in Welshpool, as said it's called Propeller plate and comes only in the very shiny version I think.

There's another aluminium mob in Bayswater Ullrich King st Bayswater.

Saw some in Mandurah at A1 Salvage only last week. Just off Gordon Road. Maybe give them a call if considering a visit, just to be sure. Think they were full sheets.

__________________
brian
elliemike


Guru

Status: Offline
Posts: 1021
Date:
Permalink  

banjo wrote:

I bought my last lot (2 full sheets) from Capral in Welshpool, as said it's called Propeller plate and comes only in the very shiny version I think.

There's another aluminium mob in Bayswater Ullrich King st Bayswater.

Saw some in Mandurah at A1 Salvage only last week. Just off Gordon Road. Maybe give them a call if considering a visit, just to be sure. Think they were full sheets.

 Already been to Capral  they have the 1.6 mm sheet but I am after the 1mm or 0.8mm thick stuff.  It has to fit into a trim  and 1 mm will go in with a bit of doctoring. 

I will try them in Bayswater.

Thanks for the tips

Mike



__________________

Mike & Ellie
elliemike


Guru

Status: Offline
Posts: 1021
Date:
Permalink  

elliemike wrote:
banjo wrote:

I bought my last lot (2 full sheets) from Capral in Welshpool, as said it's called Propeller plate and comes only in the very shiny version I think.

There's another aluminium mob in Bayswater Ullrich King st Bayswater.

Saw some in Mandurah at A1 Salvage only last week. Just off Gordon Road. Maybe give them a call if considering a visit, just to be sure. Think they were full sheets.

 Already been to Capral  they have the 1.6 mm sheet but I am after the 1mm or 0.8mm thick stuff.  It has to fit into a trim  and 1 mm will go in with a bit of doctoring. 

I will try them in Bayswater.

Thanks for the tips

Mike

 Thanks for the info Banjo.  Ullrich have what I want.  Might get over there next week.

Regards

Mike



__________________

Mike & Ellie
elliemike


Guru

Status: Offline
Posts: 1021
Date:
Permalink  

Just picked up a 1200mmx2400 sheet of 0.9 five bar.
$65:00

Thanks for your input everyone.
Mike

__________________

Mike & Ellie
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Embossed Aluminium Sheet in Perth
Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook