check out the new remote control Jockey Wheel SmartBar Canegrowers rearview170 Cobb Grill Skid Row Recovery Gear Caravan Industry Association of Australia
Members Login
Username 
 
Password 
    Remember Me  
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Issue wit Trailermate
Post Info TOPIC: Issue wit Trailermate
revemike


Senior Member

Status: Offline
Posts: 450
Date:
Issue wit Trailermate
Permalink  

I have a friend who is having issues with his TrailerMate. This is what he has told me....

I wonder if anyone can offer a solution?

"Trailmate does not go up or down with the pump handle. Have bleed air from the cylinder and checked fluid level ( it was down so refilled to within 20mm of top as instructed and still no power to lift. Can move by hand dragging the cylinder up or down but no movement with the pump handle

 
Seems from instruction there is a check valve inside that may need replacing but where do I get one and how do I fit it????"


__________________


Mike Wharton

2014 Ford Ranger XLS

Retreat Keppel 

www.timetoretreat.com
Cupie


Guru

Status: Offline
Posts: 4621
Date:
Permalink  

Here's a thread on this topic on another forum

 

http://www.caravanersforum.com/viewtopic.php?f=2&t=29852

 

Seems like this is a common problem with a less than $50 kit fix. 



__________________

See Ya ... Cupie
JohnR


Senior Member

Status: Offline
Posts: 347
Date:
Permalink  

Your friend has bent the external shaft of the unit.

They can be replaced at $33- plus postage $22-.

Contact  details are on the drive shaft.

We have been required to replace the shaft twice in the past 6 months.

You will find if the van is not straight and when unhitching the unit there will be movement causing the shaft to bend out of alignment.

We went to the distributor in Adelaide (house sitting close by) and he suggested that we use a piece of checker plate to allow some movement..

 

JohnR

 



__________________

"House sitting Barmedman NSW"
revemike


Senior Member

Status: Offline
Posts: 450
Date:
Permalink  

Thanks for these responses. I will pass this on to John.

 

P.S. I am trying to persuade him to join the Forum. It has been a great help to me and I am sure he too would find it worth joining. He too has a lot of experience he could pass on to others as well... (come on John, join the Forum mate smilesmilesmile)



__________________


Mike Wharton

2014 Ford Ranger XLS

Retreat Keppel 

www.timetoretreat.com
TAJ


Senior Member

Status: Offline
Posts: 306
Date:
Permalink  

revemike use the jockey wheel on trailmate that

              will let the front move and not bend the jack

              that is why they supply a wheel 

                                 RAY



__________________

we dont have the best of everything  we make the best of everything we have
revemike


Senior Member

Status: Offline
Posts: 450
Date:
Permalink  

Thanks Ray. I will pass that on. 

 



__________________


Mike Wharton

2014 Ford Ranger XLS

Retreat Keppel 

www.timetoretreat.com
PeterD


Guru

Status: Offline
Posts: 4713
Date:
Permalink  

Mike, does the pump have a lot of resistance when you pump it? If the piston shaft is bent then there should be considerable resistance when you try to pump it up. The fact that your mate "Can move by hand dragging the cylinder up or down" seems to tell me that it is not bent. Caravan club friends have been using thes for all this century and I have never heard of them bending before today.

I reckon your mate needs a repair kit for the unit - http://caravansplus.com.au/catalog/product_info.php?products_id=2280 - as you can see it comes with a DVD video instruction.



__________________

PeterD
Nissan Navara D23 diesel auto, Spaceland pop-top
Retired radio and electronics technician.
NSW Central Coast.

 
revemike


Senior Member

Status: Offline
Posts: 450
Date:
Permalink  

PeterD wrote:

Mike, does the pump have a lot of resistance when you pump it? If the piston shaft is bent then there should be considerable resistance when you try to pump it up. The fact that your mate "Can move by hand dragging the cylinder up or down" seems to tell me that it is not bent. Caravan club friends have been using thes for all this century and I have never heard of them bending before today.

I reckon your mate needs a repair kit for the unit - http://caravansplus.com.au/catalog/product_info.php?products_id=2280 - as you can see it comes with a DVD video instruction.

 Thanks PeterD. I will pass this on. I tend to agree with you. I have been using one too for a few years now and have not had issues with them either ( the one my friend has is my first one, I sold to him when I got a new one with my new Retreat caravan).

The van I used this one on was not heavy on the ball and nor is his van so I dobut it has been bent.

All suggestions are great as one will no doubt help sort this out for him.

cheers, Mike.



__________________


Mike Wharton

2014 Ford Ranger XLS

Retreat Keppel 

www.timetoretreat.com
ken thomas


Guru

Status: Offline
Posts: 1476
Date:
Permalink  

mike
You sold him a dud naughty naughty
Ken

__________________
DUN WURKUN
Cupie


Guru

Status: Offline
Posts: 4621
Date:
Permalink  

ken thomas wrote:

mike
You sold him a dud naughty naughty
Ken

 Always a problem selling something to a relo or mate.

Almost like giving a lifetime warranty.



__________________

See Ya ... Cupie
revemike


Senior Member

Status: Offline
Posts: 450
Date:
Permalink  

Cupie wrote:
ken thomas wrote:

mike
You sold him a dud naughty naughty
Ken

 Always a problem selling something to a relo or mate.

Almost like giving a lifetime warranty.

I hear you. And I agree...

Ken, the unit was working fine and continued to work fine as John used it on his Qld sojourne in 2014.smilesmile

It started misbehaving when he returned to Tasmania furiousfurious

 

 



__________________


Mike Wharton

2014 Ford Ranger XLS

Retreat Keppel 

www.timetoretreat.com
PeterD


Guru

Status: Offline
Posts: 4713
Date:
Permalink  

Sounds like it does not like cold weather.

__________________

PeterD
Nissan Navara D23 diesel auto, Spaceland pop-top
Retired radio and electronics technician.
NSW Central Coast.

 
ken thomas


Guru

Status: Offline
Posts: 1476
Date:
Permalink  

Might have been the sea salt on the ferry
Ken

__________________
DUN WURKUN
revemike


Senior Member

Status: Offline
Posts: 450
Date:
Permalink  

ken thomas wrote:

Might have been the sea salt on the ferry
Ken

 maybe smile



__________________


Mike Wharton

2014 Ford Ranger XLS

Retreat Keppel 

www.timetoretreat.com
EilsnAlby


Veteran Member

Status: Offline
Posts: 85
Date:
Permalink  

G'day Mike ... from memory there is a seal in the housing that the lever pumps up and down. If the seal is leaking maybe that it's not pumping. You can get a seal replacement kits from Trailermate or most caravan spare parts place. They have a very instruction DVD that comes with the replacement kit it's very easy ... trust I did mine with no problems

 

Cheers

Alby



__________________
revemike


Senior Member

Status: Offline
Posts: 450
Date:
Permalink  

EilsnAlby wrote:

G'day Mike ... from memory there is a seal in the housing that the lever pumps up and down. If the seal is leaking maybe that it's not pumping. You can get a seal replacement kits from Trailermate or most caravan spare parts place. They have a very instruction DVD that comes with the replacement kit it's very easy ... trust I did mine with no problems

 

Cheers

Alby

 thanks Alby. 



__________________


Mike Wharton

2014 Ford Ranger XLS

Retreat Keppel 

www.timetoretreat.com
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Issue wit Trailermate
Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook