SmartBar Floriade Darwin International Film Festival Goodlife RV Resorts Celtic Fest
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Thetford water pump


Senior Member

Status: Offline
Posts: 355
Date:
Thetford water pump


Does anyone know how to access the water pump on a thetford 402 toilet, our has stopped working. I have checked the fuse but I can not find access to the pump itself.



__________________

You can't get lost, if you don't care where you are going.



Veteran Member

Status: Offline
Posts: 79
Date:

Didn't work ! Put this into Google - thetford c402 repair manual then select the link to the pdf file.

-- Edited by Wanderlust on Tuesday 8th of July 2014 05:40:15 PM

__________________


Guru

Status: Offline
Posts: 6555
Date:

We have a different model, however, frequently the water just stops squirting and swirling.  We found, after one caravan mob telling us they had fixed the problem at an exorbitant price, and another selling us the part that we did not need, that it was not the pump, but the filter inside the hose was clogged up with calcium.  Pays to check that as well.  The instructions for that should also be on the repair manual.



__________________

Pay it forward - what goes around comes around

DUNMOWIN is no longer on the road and still DUNMOWIN!  



Senior Member

Status: Offline
Posts: 355
Date:

Thanks for the info, could you point me in the direction of a repair manual or tell me how to access the filter. Thanks again



__________________

You can't get lost, if you don't care where you are going.



Guru

Status: Offline
Posts: 6555
Date:

If you google   thetford c402 repair manual, the second optionis a PDF which is the repair manual.  Check it out first.  if no luck, PM us, perhaphs John can help, but ours was not the pump.



__________________

Pay it forward - what goes around comes around

DUNMOWIN is no longer on the road and still DUNMOWIN!  



Senior Member

Status: Offline
Posts: 355
Date:

Thanks for all the help i thought I had already searched google, but I must have done a boy look.
It looks reasonably simple will try

__________________

You can't get lost, if you don't care where you are going.



Veteran Member

Status: Offline
Posts: 46
Date:

I replaced my pump recently not easy to find, take the lid off where the handle and flush switch are then get someone with a small hand to twist their way round to pull it up after much stuffing around my problem turned out to be the printed circuit

Bear



__________________


Guru

Status: Offline
Posts: 746
Date:

i hope you didnt throw the old one out . if its the little submersible one in the holding tank for the toilet it can be reused .

my story
hadnt used the van for a few mths and we went away for a long weekend i took the van down and della stayed wile i worked and came down a few days later . she told me the pump didnt work yea rite i said but she was rite . i looked em up on the net and found lots of different prices . i thought what the heck and started to pull the dunny apart .i found the pump pulled it out and had another beam . lol first i gave it a spray with wd40 then i stuck a tooth pick in the impeller and gave it a twist it (all wile still connected to the power) supply hey presto . no more bucket to flush the loo and its still going after 4 mths . .
i hope this helps someone out

dibs

pss bear had it rite on wwhere and how to get it out . what was strange to me is why o why do you put a printed circuit board on a pump that flushes s*&t lol

__________________

gdyble

DONT DIE WONDERING ONE LIFE ONE CHANCE JUST DO IT 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook