i am going to fit 20lt fuel containers to the A frame of the van alongside the 9.5lt gas cylinders , question is plastic or steel ,i have seen a lot of different types
any recommendations of what type might be best ,the van is not an off road van ,
I am a bit old-fashioned .... I would only use steel jerry-cans. I have one that is at least 35 years old and still going really well and in use. I also have one that is about 11 years old. I believe they are stronger and more likely to survive 'rough/careless' handling.
Having said that, I do know many prefer the PROPER plastic ones - the ones with the Australian standard marked on them.
Like most things in life and travelling - horses for courses .. and ultimately your preference.
Cheers - John
__________________
2006 Discovery 3 TDV6 SE Auto - 2008 23ft Golden Eagle Hunter Some people feel the rain - the others just get wet - Bob Dylan
Scooner, take care here, our new Jayco has jerrycan holder mounted on the A frame between the two gas bottles, there is a small warning notice riveted to the jerrycan holder that advises owners that only water should be carried here.
I have two holders on the drawbar but they sit outboard of the two gas bottles. I would think sitting between the gas bottles would be a bugger to haul out of their carriers, almost a HSE issue.
__________________
Cheers Jeff
Ticking off the bucket list before we kick it!
200 TTD with Evernew 22'6" and 40+ years in the oil & gas industry, now retired. CMCA Member.
I have two holders on the drawbar but they sit outboard of the two gas bottles. I would think sitting between the gas bottles would be a bugger to haul out of their carriers, almost a HSE issue.
We hve the same setup, outboard of gas cylinders.
We use good quality steel gerries to AS
__________________
Why is it so? Professor Julius Sumner Miller, a profound influence on my life, who explained science to us on TV in the 60's.