check out the new remote control Jockey Wheel SmartBar rearview170 Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> worn WDH
Post Info TOPIC: worn WDH
villatranquilla


Guru

Status: Offline
Posts: 1164
Date:
worn WDH
Permalink  

have had to replace the WDH due to bent bar and excessive wear. Most common reason for the this is not removing bars when backing up and/or chains not hanging vertical but on slight angle.

I am guilty of both so have paid the price. Could not get the chains hanging absolutely vertical as the cross member/brace on the drawbar was 1/2 an inch to far back toward the van body. So the chain receivers were not directly in-line with the chain attachments on the bars.

Tow bar specialist said the chain receiver could be cut/grinded to fit and tack welded to the drawbar as well as using the usual attaching bolt.

Fortunately the new hitch has longer bars which solved the problem without any modifications.

 



__________________

Jenny and Barry

2009 Roma Elegance / 2013 Colorado. Permanent travellers 2011-2015 now just travel for 4-6 mths 
PeterD


Guru

Status: Offline
Posts: 4730
Date:
Permalink  

There was a query on another forum regarding chains not hanging after he changed his hitch. There was a good article there giving a good answer - read this



__________________

PeterD
Nissan Navara D23 diesel auto, Spaceland pop-top
Retired radio and electronics technician.
NSW Central Coast.

 
blaze


Guru

Status: Offline
Posts: 2339
Date:
Permalink  

metal to metal is always going to wear. The small amount of reversing as aposed to the large amount of forward movement tells me that its the forward movement that wears them out and in the scheme of things if they are 1/2 an inch off verticle I cant see that making a difference. My way of thinging is that its normal wear and tear and the reasons given are a myth to void any claims against manufacturing. My thoughts only.
cheers
blaze

__________________
http://blaze-therese.blogspot.com/
Bunkerbob


Senior Member

Status: Offline
Posts: 278
Date:
Permalink  

Tend to agree blaze. My WDH is worn at the big end and it appears that the area to fit it is about 12mm to wide and does not accommodate the end well. This WDH is over 5 years old so not to bad but we do use a small amount of grease, cleaned and replaced probably very 2nd or 3rd hook up so the wear is metal compression rather than metal wear.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> worn WDH
Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook