I had a thought this morning, I wonder if I could hook up a Anderson Plug to the wire on the above mentioned pump, use my 6B&S extention Cable plugged into the Anderson Plug on the back of the Prado.
So I soldered the wires into a Anderson Plug, hooked it all up and it worked like a charm. Now I don't have to worry about alligator clamps or the cig lighter plug that did't work anyway due to voltage drop.
I'm a happy camper.
I put a comment in Techies Corner as well.
edit...sorry not sure what whent wrong, I meant to put this in the hints section
-- Edited by Dougwe on Sunday 3rd of February 2013 06:55:28 PM
__________________
Live Life On Your Terms
DOUGChief One Feather (Losing feathers with age)
TUG.......2014 Holden LT Colorado Twin Cab Ute with Canopy
DEN....... 2014 "Chief" Arrow CV (with some changes)
I have run an anderson plug to the side of my van which is hooked up to the caravan smart charger, so now with another long lead with anderson plugs on both ends I can charge my dual battery in the car when I have power I also have a smaller lead with alligator clips on one end so I can also charge the main car battery if needed I saw this on a van at Mareeba and works well Ken
in my forester i hard mounted the compressor and run air line to the front and the back with taps then just had hose with gauge im doing the same on the colorado consatena