check out the new remote control Jockey Wheel SmartBar Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Awning locking knob


Newbie

Status: Offline
Posts: 4
Date:
Awning locking knob


Anyone know the procedure to replace the "Main Black Locking Knob" on a Carefree Awning?



Attachments
__________________


Guru

Status: Offline
Posts: 2266
Date:

I did it on mine some time ago.

From memory, (1)roll out the awning as if using as a carport, (2) unclip the legs from the van and let them slide under the van (helps with 2 people).

Now you can slide the telescopic sections apart allowing the bolt for the black knob to be removed.

Cheers Neil



__________________

Neil & Lynne

Pinjarra 

Western Australia


MY23.5 Ford Wildtrak V6 Dual Cab / 21' Silverline 21-65.3

' 1260w Solar: 400ah Lithium Battery: 2000w Projecta IP2000 Inverter

Diesel Heater: SOG Toilet Kit: 2.5kw Fujitsu Split System A/c

 

 



Guru

Status: Offline
Posts: 6997
Date:

We actually got the knob back in place using a couple of pairs of long-nosed pliers and a lot of bad language!!! Delta's way sounds much more sensible.
Checking that the knobs are tightened has been added to our departure checklist now.

__________________

Cheers,  Gerty. ... at home

"Leaning forward to see whats coming"
                                                                   

Duh


Guru

Status: Offline
Posts: 3240
Date:

Delta18 wrote:

I did it on mine some time ago.

From memory, (1)roll out the awning as if using as a carport, (2) unclip the legs from the van and let them slide under the van (helps with 2 people).

Now you can slide the telescopic sections apart allowing the bolt for the black knob to be removed.

Cheers Neil


 About the same as what I did Neil (also from memory) on my Jayco.  



__________________

Vic  - Mitsubishi Outlander and rear end tent....

 

 

 



 



Guru

Status: Offline
Posts: 2238
Date:

Gerty Dancer wrote:

We actually got the knob back in place using a couple of pairs of long-nosed pliers and a lot of bad language!!! Delta's way sounds much more sensible.
Checking that the knobs are tightened has been added to our departure checklist now.


 yes, same, and same language.



__________________

Rosie



Newbie

Status: Offline
Posts: 4
Date:

Neil, your idea sounds good. Thanks.

 

Thank you all...



__________________


Veteran Member

Status: Offline
Posts: 63
Date:

Do a search on the internet for Awning locking knob. We found a set on ebay. They have nylon inserts and will never come loose (or so it is claimed). I think I only paid $23.00. Got fed up of leaving them scattered about WA.

__________________
Grahame


Veteran Member

Status: Offline
Posts: 63
Date:

Found the link:
http://www.ebay.com.au/itm/Caravan-awning-parts-adjustment-knob-retrofit-carefree-/300744540653?pt=Caravan_Parts_Accessories&hash=item4605c581ed

__________________
Grahame


Guru

Status: Offline
Posts: 6882
Date:

How do you lose them?
I just had a new awning and roller installed but kept the other hardware. I've never lost a knob.
I tighten them up when I secure the awning for travel, when I strap everthing into place.

__________________

20ft Roma caravan - Mercedes Benz Sprinter - SA-based at the moment.
Transport has no borders.

Management makes the decisions, but is not affected by the decisions it makes.



Veteran Member

Status: Offline
Posts: 63
Date:

It's a male thing - I lose my socks, keys, wallet - in fact most of the time I think I'm losing my mind!

I suppose I just forget to tighten them



__________________
Grahame


Newbie

Status: Offline
Posts: 4
Date:

ebay page indicates '"delivered with all fitting instructions"

Do you still the instructions?

Thanks

John



__________________


Master (of Mischief)

Status: Offline
Posts: 10942
Date:

this any good for you guys

http://www.campingworld.com/includes/productSpecs/service.pdf

http://www.carefreeofcolorado.com/docs/tech/052876-201r2%20Patio%20Awning%20Owner%20Manual.pdf



__________________

 

                                 



Veteran Member

Status: Offline
Posts: 63
Date:

Although I don't still have the instructions it was very simple. Smear a bit of Vaseline (grease or whatever) on the underside of the retangular locking plate. Insert it into the awning arm ond slide it up into position with your finger. The vaseline will hold it in position while you line up the handle and turn to engage the screw. Believe me, if I can do it without swearing anyone can.

I think the fact that the replacement kit has a rectangular plate which doesn't turn in the awning arm helps



__________________
Grahame
Duh


Guru

Status: Offline
Posts: 3240
Date:

Cruising Granny wrote:

How do you lose them?
I just had a new awning and roller installed but kept the other hardware. I've never lost a knob.
I tighten them up when I secure the awning for travel, when I strap everthing into place.


 In my case, the metal thread inside the knob separated from the plastic knob, probably from over tightening over the years, so had to be replaced.  The plastic knob was also cracked. 

I could have tried removing it and using a strong glue on it but not worth it and probably would have failed again later, so replaced.



__________________

Vic  - Mitsubishi Outlander and rear end tent....

 

 

 



 



Newbie

Status: Offline
Posts: 4
Date:

Fixed the awning locking knob today - took a few hours to remove the part (lower brace siezed up inside the upper brace due to locking knob stuffed, so needed sawing off) and about 10 mins to fit the new one blankstare

Found the easiest way to remove siezed braces was to remove grub screw at base and slide upper and lower braces off...

Thanks all for you advice and help.

On the road again....

John & Rosey



__________________


Master (of Mischief)

Status: Offline
Posts: 10942
Date:

good to hear you fixed it



__________________

 

                                 



Newbie

Status: Offline
Posts: 1
Date:

Unlike Neil we lifted the arm away from the van and slid the leg out making it easy to access the nut and knob. Due to extreme difficulty undoing the knob we did have to hacksaw the thread below the knob and the nut fell out making it extremely easy to replace and then slide the arm back in place. Whole process with two persons took 15 minutes and most of that was spent trying to undo the frozen knob.

 



-- Edited by PaulEC on Monday 14th of January 2019 10:32:52 AM

__________________
PaulEC
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook