check out the new remote control Jockey Wheel SmartBar Canegrowers rearview170 Cobb Grill Skid Row Recovery Gear Caravan Industry Association of Australia
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: towballs


Guru

Status: Offline
Posts: 669
Date:
towballs


Was down the hole this morning using the jack hammer and thought of another close friend who is passed, mate of mine in the Landy club, maybe the post on Alan started a process of thought,
But,

-----DO YOU ALL GREASE YOUR TOWBALLS, IF NOT , DO IT NOW,


Now I,ll put the wind up you all ,my membership with the  LandRover club entitled  to a lot of freebies, one of them was entrance to field days where demo's where on all the time , one was of the use of rescue equipment  and we were all watching when a towball was used the wrong way, a snatch strap was just hooked on to pull a vehicle out of a bog, and it snapped off,
Like slingshot it went in a striaght line backwards, straight through the front window and then through the back window of the old landy that was bogged
It was all carefully orchestrated and planned and was very impressive,
that was the reason why there was no driver in it , if there was he would have been very poorly,  and the weight of a bogged vehicle is many times the original weight of the vehicle

==SO BE WARNED


__________________
Mike and Judy


enjoy your sunrises,we only have a limited number


Guru

Status: Offline
Posts: 700
Date:

Hey Mike. excuse my ignorance, but where would i grease it and why ?


Johnw

__________________

There is no road to happiness. Happiness is the road.

Just Lovenit.


Wentworth Falls NSW



Guru

Status: Offline
Posts: 1218
Date:

Just a smear on the ball itself,stops any friction between the ball and the top part.Cheers.Ibbo.

__________________

"Wings Over The Navy"



Guru

Status: Offline
Posts: 817
Date:

Grease collects dirt and dust; makes a mess on any thing that touches it.
Supermarket bags are made of a very low friction material.
A couple of layers of the plastic will act as a great "slip" and can replaced at every hook up.

Just make sure that the tug and van are well "earthed" to each other.

__________________

Old age and treachery will overcome youth and enthusiasm any day.......




Guru

Status: Offline
Posts: 1218
Date:

Always keep the tow ball covered when not in use.I use a spray on Lanolin.

__________________

"Wings Over The Navy"



Guru

Status: Offline
Posts: 6882
Date:

I grease it, but take the bulls head off with the ball if I'm not towing for a while, like now. I sprayed it with lanoguard before I stowed it.
Having dusty grease is still better than no grease to reduce friction.
It's my gear and I look after it so it will last. Prevention is better than a wreck and the long wait for insurance.
Nothing like the feel of new, sticky grease between the fingers. Cheers Chris

__________________

20ft Roma caravan - Mercedes Benz Sprinter - SA-based at the moment.
Transport has no borders.

Management makes the decisions, but is not affected by the decisions it makes.



Senior Member

Status: Offline
Posts: 131
Date:

   hi all.       i hope everyone is having a great day????                        i have even used margarine to grease my towball.          if you have no lubicant on the towball,   this creates a lot of heat,  and you start to get a bind up in the metal.      as you steer  around a corner, your caravan or trailer,pushes you onto the wrong side of the road. ( the bind up wont allow the trailer to follow the car )  this has caused hundreds of head-on crashes.            if you have a lot of weight on your towball,the friction is greater,and i do believe this has caused a lot of vans to tip the car over.                 so dont forget grease the ball 

__________________


Senior Member

Status: Offline
Posts: 482
Date:

Use silicone spray on mine, if none handy use WD40, always put a tow ball plastic cover on it when not towing. Have heard Rolly's tip is great also. I clean and spray mine just before towing.

Vic

__________________

      Vic
"Sunset Coast"
Member - Australian Touring Caravan & Motorhome Club
www.atcmcc.org.au




Guru

Status: Offline
Posts: 700
Date:

Thanks for the info people.
As usual i have not made myself clear. Is it better to grease the tow ball or can you grease the hitch coupling socket ?




Johnw

__________________

There is no road to happiness. Happiness is the road.

Just Lovenit.


Wentworth Falls NSW



Guru

Status: Offline
Posts: 6882
Date:

The grease on the ball will be shared with the coupling when you hitch up and tow away. I pack a fair bit on the ball at the time of hitching, especially if I've been parked up for a while. Anything to reduce friction and wear and tear on these vital parts.
I've been using wheel bearing grease because I have a pot in the car (shed) left over from repacking the van wheel bearings.
I'm not sure if the grease is good for the skin, but I don't think it hurts.
Doesn't do the manicure much good tho'.
Cheers Chris

__________________

20ft Roma caravan - Mercedes Benz Sprinter - SA-based at the moment.
Transport has no borders.

Management makes the decisions, but is not affected by the decisions it makes.



Senior Member

Status: Offline
Posts: 482
Date:

John,

I usually give my A frame towing socket a wipe out with a rag now and then to get rid of any grit and give that a spray of silicone or WD40 as well as the ball before hitching up for a long trip.

Vic



__________________

      Vic
"Sunset Coast"
Member - Australian Touring Caravan & Motorhome Club
www.atcmcc.org.au




Guru

Status: Offline
Posts: 2531
Date:

just be very carefull here folks, greasing the ball is a great idea and if you are going to stay on the bituman go ahead and slap it on

but if you are heading offroad for a good number of km's please wipe all the grease off, just leave the tiniest of smears right up in the socket

when old man dust gets in there, and he will, he will chew your socket out in a matter of a few hundred km's on a road filled with bulldust, one thing you dont want out in the simpson is a chewed up socket

a small ammount on the tip of the ball before hitching is the way to go, they dont move all that much on the road to warrant a great deal of friction modification

clean and respot with the grease every other day if travelling any distance over dusty roads, keep that dust at bay

check that ball for tightness every week, it will come loose, and if you are using a hayman reese type hitch then keep an eye on that hitchpin for wear as well

__________________

"LOOK BUSY,..............GOD'S WATCHING"



Guru

Status: Offline
Posts: 2333
Date:

If any of you have those lockable hitch pins with the circular keys which are a good idea to prevent theft just check it, a mate had one on his car and somehow the QA department in "tow pin hitch factory No21 in Shanghai" had not hardened his and it actually cut through and the van came adrift with a clunk, fortunatley the chain held it.......

__________________
Don't take life too seriously.... No one gets out alive

KIA Sorento CRDi EX  ( Ebony black) with 5 hex chrome plated tire air valve covers, Coramal Sunsheild, Elcheapo GPS, First Aid Kit, full KIA toolkit & Yellow lenses on the Foglights......
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook