check out the new remote control Jockey Wheel SmartBar rearview170 Beam Communications SatPhone Shop Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Click here for the Grey Nomads website -> The Grey Nomads Forum -> The Grey Nomads - General -> An caravan electrical question
Post Info TOPIC: An caravan electrical question
mikeody


Veteran Member

Status: Offline
Posts: 35
Date:
An caravan electrical question
Permalink  

Hello All,
Now here's a question for those who have been around caravans a while.
My van [1989 Coromal Aussie Tourer] like many other vans has a 12V globe within each of the usual overhead light fittings [shared with 240V globes] operated by a separate [brown] switch mounted on each of the lights.
Is it usual for these to get their power direct from the connector to the car ?
I ask because I cannot find any trace of the 12V wiring going anywhere else - without pulling the ceiling and walls apart [!] - I was expecting a fused switch or something similar - just like teh 240V supply has.
What I am keen to do is to wire the 12V lights so that I can use them from  my stand alone deep-cycle battery rather than 'risking' my car battery. All I have to do of course is 'intercept' the 12V supply and connect to my stand alone battery - through an isolator and a fuse naturally - but so far I have no idea where to look.
Coromal dont seem to offer any manuals or wiring diagrams which rather surprises me. Or is that 'normal' with caravan manufacturers ?
Thanks.



__________________
Tidak Apa-Apa
mike and Judy


Guru

Status: Offline
Posts: 669
Date:
Permalink  

Had an old Windsor that had no power of its own, installed a deep cell 100amp hr  into a VENTED cupboard near the front and wired a female connection to the front of the van connected to the battery, when the car was elsewhere we just put the van plug into it ,  simple as ,

__________________
Mike and Judy


enjoy your sunrises,we only have a limited number
mike and Judy


Guru

Status: Offline
Posts: 669
Date:
Permalink  

I'm on the last leg , we are going home , leaving the s******city behind
the shopping centre here on the Tweed is almost finished, and its bloody enormous ,and NOISY,
Why cannot the archeitect install some sound deadening somewhere, all hard surfaces and shiny tiles, A thing of beauty to some ??????

__________________
Mike and Judy


enjoy your sunrises,we only have a limited number
dave06


Guru

Status: Offline
Posts: 2601
Date:
Permalink  

the older vans and a lot of new ones "draw" the power from the vehicle inlet through a "live" wire the van is then earthed throught the main earth wire of the lights

it would be a simple matter of disengaging the "live" or even biting in to it and placing a battery and an on board charger in a box, preferably vented to outside or at least vented

as a hint for where to start the power wire is normally orange, grab a power tester, turn the vehicle on ( whisper sweet nothings into her rear veiw mirror normally does it) probe the power wire and see if that is it

as Mike states it really is that simple, but be sure and fuse the feed line and bring all earths back to the battery earth block

__________________
 me, the dragon, & little blue,  never stop playing, live long,  laugh lots, travel far, give a stranger a smile, might just be your next best freind.  try to commit a random act of kindness everyday

 http://daventhedragon.blogspot.com
mikeody


Veteran Member

Status: Offline
Posts: 35
Date:
Permalink  

Thanks Dave thats what I thought woul;d be the case.
The deep cycle battery is already in place with all the various safety issues addressed. I have set up a female cig lighter plug for the Waeco plus a 12V power outlet for whatever. All that was left to do was to locate the live feed to the existing 12V lights, connect up and hey presto. Its just a matter of finding it !!

__________________
Tidak Apa-Apa
dave06


Guru

Status: Offline
Posts: 2601
Date:
Permalink  

too easy Mike!! keep it simple and enjoy the benefits, you could expand the setup anytime with a solar panel and a 12 volt twin pronged plug

__________________
 me, the dragon, & little blue,  never stop playing, live long,  laugh lots, travel far, give a stranger a smile, might just be your next best freind.  try to commit a random act of kindness everyday

 http://daventhedragon.blogspot.com
dave06


Guru

Status: Offline
Posts: 2601
Date:
Permalink  

Mike just one other thing, be sure and disconnect the power wire from your tow vehicle before attaching the second battery

to connect the second battery in to the same line will create a live 24 volt situation and a possible fire or at least a blown fuse if you are very lucky

be sure and isolate the vans electrics from the cars until you install a battery isolater

__________________
 me, the dragon, & little blue,  never stop playing, live long,  laugh lots, travel far, give a stranger a smile, might just be your next best freind.  try to commit a random act of kindness everyday

 http://daventhedragon.blogspot.com
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Click here for the Grey Nomads website -> The Grey Nomads Forum -> The Grey Nomads - General -> An caravan electrical question
Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook