check out the new remote control Jockey Wheel SmartBar rearview170 Beam Communications SatPhone Shop Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: BEP 600-DCM V3.2 DC monitor


Veteran Member

Status: Offline
Posts: 50
Date:
BEP 600-DCM V3.2 DC monitor


Hello Techies,

Well I am stumped, more over it but stumped just the same.

My Roadstar has one of these wonderful battery monitor systems which I didn't care to much about and roughly programmed it when I had just 2 x105Ah AGM batteries and no monitoring of the inverter, DC-DC Charger and Solar.

Now I have added a busbar to connect all my earths to the system, inverter included, solar, DC-DC charger and the 2000 watt Inverter are all connect to a 300ah Lithium PO4life battery through the monitor. I read the manual 7 times or 17 times and tried to programme 9 times but I just can't get it right.

Has anyone have knowledge on programme this unit, luckily for me the monitor is set by the door at the rear of the van and the system ( Busbar) is in the front boot so swapping it out isn't going to work unit I decide to replace the cladding which might be in 5 years, so one can access the wiring.

Can't find any videos on Youtube and yet some resellers are still selling this model, so please help as I am just about over it.

 

 

 

 

 

 



__________________
Ram man with a Van
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook