I have a damaged access door , the plastic frame needs to be replaced, I can get a frame from caravans plus , however I need to get the door insert away from the existing frame , needless to say I have no idea how this is done
has anyone had the same problem ? , and hopefully the solution.
It looks like the insert pushes into the frame and perhaps is glued to the plastic frame , but I cannot see how to remove the insert without damaging the old frame
If you are replacing the frame, why does it matter if you damage the old frame?
About half way through the video (link attached) you'll see how the insert panel is fitted, depending on the glue or sealant they used will determine how you can remove the old panel from the existing frame. In any case you'll most likely have to sacrifice the old frame to get the panel out.
-- Edited by madaboutled on Tuesday 3rd of March 2020 04:40:37 PM
__________________
Steve, Di & Ziggy We named our Motorhome "Roadworx" because on the road works "On The Road Again" Ford Transit with 302 Windsor V8 conversion, C4 Auto, 9 Inch Ford Diff All Lighting L.E.D., 260 Amp/h AGM, 530 Watt Solar + Kipor Backup Gen.
However I dislike damaging after all there may be a bit I will need later, also I would like to understand exactly what I am doing before I do it thetford do have an installation guide , I will order the door then see what is needed I think.
-- Edited by madaboutled on Tuesday 3rd of March 2020 04:43:51 PM
__________________
Steve, Di & Ziggy We named our Motorhome "Roadworx" because on the road works "On The Road Again" Ford Transit with 302 Windsor V8 conversion, C4 Auto, 9 Inch Ford Diff All Lighting L.E.D., 260 Amp/h AGM, 530 Watt Solar + Kipor Backup Gen.