I have a 2005 Jayco Heritage & when I lower the roof the holding clips do not fully cover the brackets. It appears that the roof is sitting too far forward about an inch.
Has anyone else encountered this? Is it a major problem? Can I fix it?
I have it in mind that this, or a very similar, problem was raised on either this or the technical forum within the past 12 months. Try a search and you may find a solution.
__________________
"I beseech you in the bowels of Christ think it possible you may be mistaken"
Oliver Cromwell, 3rd August 1650 - in a letter to the General Assembly of the Kirk of Scotland
New gas struts will fix the problem. Have been down the same path with my Jayco poptop. I would sugest that all 4 are replaced as this will keep them all at the same pressure.
Agree with the struts. The same thing happend to my pop top. Rear struts worn, top not sitting level when raised and moving forward when lowered. Replaced the struts and problem solved.
EJP
Thanks folks,
I am told the struts were replaced about 6 months before I bought it i.e about 12 months ago.
I have tried a few of the other tips and there is improvement. It seems to like being pulled down at both ends the same time, but I can't get it dead centre & I believe the van has had little use, so will try it out a bit & see what develops.