check out the new remote control Jockey Wheel SmartBar Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: replacing a globe on outside of a Supreme Getaway poptop?


Senior Member

Status: Offline
Posts: 287
Date:
replacing a globe on outside of a Supreme Getaway poptop?


Hi, one of our permanents is having difficulty figuring out how to replace the outside globe on her outdoor light? She said she unscrewed the cover but could not get to teh bulb, it was still behind a sheet of plastic? Any helpful ideas would be appreciated?



__________________

I am made up of flaws stitched together with good intentions.

 

Don't sweat the small stuff in life.

 



Guru

Status: Offline
Posts: 1142
Date:

Don't have that brand but guessing that the plastic cover will be clipped in and needs springing out.  A photo would be useful as I am sure that it will be one of the standard lights.



__________________

I'm just a CAD at heart



Senior Member

Status: Offline
Posts: 287
Date:

Thanks Cadpete, I will go and help her take outside cover off again and take a look.

__________________

I am made up of flaws stitched together with good intentions.

 

Don't sweat the small stuff in life.

 



Senior Member

Status: Offline
Posts: 287
Date:

julieslight.jpgHope this works, been ages since I posted a photo.



Attachments
__________________

I am made up of flaws stitched together with good intentions.

 

Don't sweat the small stuff in life.

 



Guru

Status: Offline
Posts: 1142
Date:

Does the' Labcraft' piece where the wires enter lever up??, can't tell if it is a single piece molding or not.  Might help with a photo of front side as well.

 

Could try google with the Labcraft model number as another option. Sorry can't help more at the moment

http://www.grassroutesleisure.co.uk/products/240/labcraft-opal-fx21-awning-light  seems to be the same light and reading the blurb seems the lens is just clipped in at the front?

also

http://www.aspoeck.co.uk/catalogues/Others/Labcraft_Catalogue_211108.pdf   page 36



-- Edited by Cadpete on Sunday 17th of April 2016 07:26:22 PM

__________________

I'm just a CAD at heart



Senior Member

Status: Offline
Posts: 287
Date:

I got a printout about the light, it seems to say that there is a special clip and o ring arrangement to get the front bit off. I am too scared to force it as it's not my light.


__________________

I am made up of flaws stitched together with good intentions.

 

Don't sweat the small stuff in life.

 



Guru

Status: Offline
Posts: 1142
Date:

 

Fair snuff - I tried to find a video but had no luck, although it was a very quick look.  Guess other option is to try and find contact details for LaABCRAFT. 

Sorry couldn't help more.



__________________

I'm just a CAD at heart



Senior Member

Status: Offline
Posts: 287
Date:

Thanks Cadpete, you were a big help, thanks.

__________________

I am made up of flaws stitched together with good intentions.

 

Don't sweat the small stuff in life.

 



Guru

Status: Offline
Posts: 848
Date:

I've converted a few of these types of lights over to LED for a few people over the past couple of years. The cover comes off from the front, you need to use a small blade screwdriver to gently pry it off. If the fitting is old or has yellowed then it may be very brittle, so lots of care needs to be taken so you don't crack the cover or damage the lugs. If you shine a strong light (torch) around the edges you can some times see the notches where its held into the main body. Knowing where the notches are helps as you need to gently pry the cover lugs out from either side of the notches.

Hope this helps, Regards Steve.

 



__________________

Steve, Di & Ziggy We named our Motorhome "Roadworx" because on the road works "On The Road Again"
Ford Transit with 302 Windsor V8 conversion, C4 Auto, 9 Inch Ford Diff All Lighting L.E.D., 260 Amp/h AGM, 530 Watt Solar + Kipor Backup Gen.



Senior Member

Status: Offline
Posts: 287
Date:

Thanks Steve, will go and have a look tomorrow.
Cheers


__________________

I am made up of flaws stitched together with good intentions.

 

Don't sweat the small stuff in life.

 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook