check out the new remote control Jockey Wheel SmartBar Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Thetford Toilet elect water pump switch not working


Senior Member

Status: Offline
Posts: 295
Date:
Thetford Toilet elect water pump switch not working


Hi

Has anyone pulled apart the Toilet water press part on the top of a 2011 Coromal Element 542 toilet?  I thought it was a Thetford toilet, but not too sure now as I downloaded a Thetford Toilet Repair guide and can't locate anything that looks like it!

Assistance appreciated.

Glen

 



__________________

Glen

 

A diesel Nissan Pathfinder towing a Coromal Element 542.



Guru

Status: Offline
Posts: 1047
Date:

Glen,
May not be the pump switch but the pump. The pump impeller in one type of Thetford is under the toilet roll holder and held in my a SS Screw, undo the screw and out comes the pump with a frozen impeller, use a screw driver to turn the impeller to unfreeze ( may take sometime) and the pump will work again. Have heard some use a dash of dish washing fluid to keep the pump/impeller lubricated.

However if the impeller is frozen once without use every so often it will happen again.

Peter

__________________


Senior Member

Status: Offline
Posts: 295
Date:

All sorted out. It was the controller - the circuit board had popped out of the holding pins and once back in, it works fine.

Thanks
Glen


__________________

Glen

 

A diesel Nissan Pathfinder towing a Coromal Element 542.

Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook