hi all this is my first attempt on any forum so here goes my wife and I have just started to get the bug we tow a 2014 bluesky van with a 2015 mazda bt50 I have a 125 w solar panel on roof of bt50 and an aux batt under the tray if possible could someone help with my question a bit long winded first up sorry I want to run 8 b&s cable from solar panel to a controller and run 6a&g cable from aux batt to a bus bar from bus bar to controller another cable from bus bar to Anderson plug to run 80 ltr fridge my question is can I use the one cable from aux batt to bus bar to controller to both charge aux batt and draw power for fridge through bus bar a bit long winded but needed to give all the info I could regards wws
Welcome to the gang wws, enjoy here and out in the playground.
Mmmmm, I'm confused Now that doesn't take much at all these days so I might just step aside and let someone else tell you the ins and outs of your question.
If you don't have any luck here, slip your question into 'Techies' as there are some very knowledgable people in there only too willing to help out.
-- Edited by Dougwe on Tuesday 20th of October 2015 07:14:47 AM
__________________
Live Life On Your Terms
DOUGChief One Feather (Losing feathers with age)
TUG.......2014 Holden LT Colorado Twin Cab Ute with Canopy
DEN....... 2014 "Chief" Arrow CV (with some changes)
Maybe a drawing, scanned (or take a photo with the smart phone) and link it to the post? I'm having difficulty in trying to work it out too. I'm interested in this as when I get my van I want to be familiar with this stuff and any mods such as this may be useful.
hi all this is my first attempt on any forum so here goes my wife and I have just started to get the bug we tow a 2014 bluesky van with a 2015 mazda bt50 I have a 125 w solar panel on roof of bt50 and an aux batt under the tray if possible could someone help with my question a bit long winded first up sorry I want to run 8 b&s cable from solar panel to a controller and run 6a&g cable from aux batt to a bus bar from bus bar to controller another cable from bus bar to Anderson plug to run 80 ltr fridge my question is can I use the one cable from aux batt to bus bar to controller to both charge aux batt and draw power for fridge through bus bar a bit long winded but needed to give all the info I could regards wws
Hi WWS,
You really should post a question like this in the Techies section as a lot of them do not get on the other parts much.
Just let this one go and ask the question again there. I will answer it there if you do this. I know it is confusing when you first go on these forums and it's hard to see what to do right. Sometimes people get a bit 'narky' about things. The techies are a good lot though
Note there is also a sub-section there for solar stuff also. Click on the top marked SOLAR. Lots of good answers on there too.