check out the new remote control Jockey Wheel SmartBar Canegrowers rearview170 Cobb Grill Skid Row Recovery Gear Caravan Industry Association of Australia
Members Login
Username 
 
Password 
    Remember Me  
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Electric Brakes
Post Info TOPIC: Electric Brakes
RodLainie


Senior Member

Status: Offline
Posts: 199
Date:
Electric Brakes
Permalink  

Hi

Has anyone replaced their electric brakes on their caravan? Can you give me any tips on the best way to do it?

Cheers

Rod



__________________

C.R.A.F.T.Y OL' BUGGAS
Dougwe


Chief one feather

Status: Offline
Posts: 17343
Date:
Permalink  

Not replaced completely but had major work done on them just last week and NOT CHEAP. Replaced two bearings and two magnets both also not cheap. Thank goodness for good dealer after sales service and warranties. Just make sure any work is done properly.


__________________

Live Life On Your Terms

DOUG  Chief One Feather  (Losing feathers with age)

TUG.......2014 Holden LT Colorado Twin Cab Ute with Canopy

DEN....... 2014 "Chief" Arrow CV  (with some changes)

 
RodLainie


Senior Member

Status: Offline
Posts: 199
Date:
Permalink  

Nowhere near a dealer, we are house sitting in Gladstone. I've already done the brakes and bearings but I'm going to do the magnets and need to know if anyone can give some advice.
Thanks Doug

__________________

C.R.A.F.T.Y OL' BUGGAS
Brenda and Alan


Guru

Status: Offline
Posts: 1222
Date:
Permalink  

What parts need replacing. Have just done my complete system (magnets, shoes and drums needed replacing) and found it was vastly cheaper to buy two complete sets than to buy just the parts required. Each set includes backing plates with shoes and magnets installed as well as a pair of drums including wheel bearings. I opted to buy without wheel bearing and paid $200 per set (one axle). I got Japanese timken bearings and seals from a bearing wholesaler for $100. Have just returned home today after a two day bedding in run and everything is working very well.

Alan



__________________
RodLainie


Senior Member

Status: Offline
Posts: 199
Date:
Permalink  

Thanks Alan
All I have to do is the magnets
The brakes worked fine on our first lap and I thought after that I would see how they were and I found a light smear of grease on the drum where the magnet hits so I cleaned it off and found they did not work as good and now I am just not sure weather the grease was ment to be there
Rod

__________________

C.R.A.F.T.Y OL' BUGGAS
philip081958


Member

Status: Offline
Posts: 10
Date:
Permalink  

leave them alone you fool its a mechanics job not some would be back yarder thats why we do trades to learn the corect way of doing things play with them good by insurance if in an accedent if some one dies you are up for manslauter is it worth it how foolish some people are to save a dollar a little know how is dangerous phill



__________________

cruiser1958
RodLainie


Senior Member

Status: Offline
Posts: 199
Date:
Permalink  

Thanks philip081958
For being so blunt and not having a brain I am a jack of all trades and grew up the hard way
Please if you ever see us around come and knock on my door you flip


__________________

C.R.A.F.T.Y OL' BUGGAS
Brenda and Alan


Guru

Status: Offline
Posts: 1222
Date:
Permalink  

Magnets run out at about $50 each for std and $125 each for off road the only difference being a plastic bush, go figure a $75 piece of plastic. Try this site "huntsmanproducts.com.au" Std magnets $47 per pair and they sell online. Check the wearing surface on the drums as if they are badly scored they will need machining or replacement to prevent premature wear on new magnets.

Alan



-- Edited by Brenda and Alan on Thursday 2nd of April 2015 08:17:40 PM

__________________
philip081958


Member

Status: Offline
Posts: 10
Date:
Permalink  

brakes are not to be played withunless you realy no what you are doing .i did not meen to be rude or upset you but is realy dangerous to try and fix things if you are not properly trajned and if you were trained you would not be asking on the forum about brakes



__________________

cruiser1958
Baz421


Guru

Status: Offline
Posts: 2206
Date:
Permalink  

Rod

If your existing magnets and the brake drum are contaminated with grease or similar and not working efficiently why just fit new magnets??????

If the brake drums are stuffed you will need to replace both IMHO.

I would clean the brake drums again with a cleaner to dissolve the film of grease.

When brake shoes or drums were contaminated with oil (aka in the late 60's and into the 70's ie light trucks with oil filled rear axles) AND PARTS WERE NOT AVAILABLE we would use metho and wet them and then light them to burn off the grease/oil. Worked well in those days but is not the preferred method obviously.

Be carful you don't waste money for nothing or do 1/2 a job and hev to start again.

How have you assessed the brakes are "not working as good"????

Just my thoughts   Cheers Baz



__________________

Why is it so? Professor Julius Sumner Miller, a profound influence on my life, who explained science to us on TV in the 60's.
hako


Guru

Status: Offline
Posts: 2534
Date:
Permalink  

Rodlaine - I'm guessing the following is what you need.
I recently changed my magnets - they were Alko off road magnets which were causing the brakes to grab badly due to wear making them wedge shaped. They are very easy to replace. I found the 2 links of great help. Common sense is all you need.

http://www.alko.com.au/uploads/2008/12/Electric_Brake_Handbook.pdf

https://www.couplemate.com.au/caravan-electric-brakes-faq/

 

Good Luck.



__________________

Denis

Ex balloon chaser and mercury measurer.

Toowoomba.
RodLainie


Senior Member

Status: Offline
Posts: 199
Date:
Permalink  

Thank you to all who sent intelligent helpful advice. I now have the problem sorted.

Cheers

Rod



__________________

C.R.A.F.T.Y OL' BUGGAS
deverall11


Guru

Status: Offline
Posts: 1306
Date:
Permalink  

philip081958 wrote:

brakes are not to be played withunless you realy no what you are doing .i did not meen to be rude or upset you but is realy dangerous to try and fix things if you are not properly trajned and if you were trained you would not be asking on the forum about brakes

 Don't mean to be rude or wanting to upset you philip081958, but you need to learn to spell. Try that first.

Larry



__________________

Ex software engineer, now chef
philip081958


Member

Status: Offline
Posts: 10
Date:
Permalink  

Hi Larry my speeling might not be to good but it never kiled anyone and you understood it enough to reply.i did not try to offend people but brakes are things you should not play with cheers phill



__________________

cruiser1958
Baz421


Guru

Status: Offline
Posts: 2206
Date:
Permalink  

RodLainie wrote:

Thank you to all who sent intelligent helpful advice. I now have the problem sorted.

Cheers

Rod

Hi Rod - good news but if you could tell everyone what the solution is, it benefits us all.

Cheers Baz 



__________________

Why is it so? Professor Julius Sumner Miller, a profound influence on my life, who explained science to us on TV in the 60's.
RodLainie


Senior Member

Status: Offline
Posts: 199
Date:
Permalink  

Hi Baz
It was just the magnets worn out.Shoes and drums are good elec all been checked
but it still felt slower than normal in stoping,now will pull up well and no it does not lock up
thanks again
Take Care
Rod

__________________

C.R.A.F.T.Y OL' BUGGAS
Baz421


Guru

Status: Offline
Posts: 2206
Date:
Permalink  

RodLainie wrote:

Hi Baz
It was just the magnets worn out.Shoes and drums are good elec all been checked
but it still felt slower than normal in stoping,now will pull up well and no it does not lock up
thanks again
Take Care
Rod

Thank Rod I really appreciate it when we can share this info as it gives others confidence IMHO. 



__________________

Why is it so? Professor Julius Sumner Miller, a profound influence on my life, who explained science to us on TV in the 60's.
Little ben


Newbie

Status: Offline
Posts: 1
Date:
Permalink  

You arrogant prick 



__________________
yobarr


Guru

Status: Offline
Posts: 5420
Date:
Permalink  

Little ben wrote:

You arrogant prick 

 Hmmmmm.......I understand that some need time  to formulate a considered response,but 5 years? Cheers



__________________

v
The Travelling Dillberries


Guru

Status: Offline
Posts: 999
Date:
Permalink  

yobarr wrote:
Little ben wrote:

You arrogant prick 

 Hmmmmm.......I understand that some need time  to formulate a considered response,but 5 years? Cheers

 Must be personal.



__________________

Chris & Sharyn.

Mitchells Island. NSW.

2016 D-Max, 2012 Jayco Sterling, 1 dog, wife n me.
iana


Guru

Status: Offline
Posts: 2923
Date:
Permalink  

Not the most informative answer, being first post.

__________________
Hylife


Guru

Status: Offline
Posts: 637
Date:
Permalink  

I know the original post was 5 years ago but for those reading it again it might be worth covering the how what why etc.

I replaced the entire brakes on our Jayco for $200 using brand new complete brake assemblies from Huntsman, cheaper than just buying parts.

https://www.huntsmanproducts.com.au/products/10-5-stud-trailer-electric-drum-brake-kit-1

You just need to tell them what are the numbers on your current inner and out bearings as there are a few combinations available.

Process is easy after jacking up van onto jack stands for safety:-

Take off wheels,

take off axel dust cap and remove split pin and castellated nut

remove outer bearing and brake drum

cut brake wires near joiner on axel beam

remove four nuts from the four bolts that hold the brake backing plate and the remaining assembly to the axel to remove brakes and inner bearing.

Remove handbrake cable from brakes.

replace in reverse with new.

 

 



-- Edited by Hylife on Wednesday 2nd of September 2020 09:22:44 PM

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Electric Brakes
Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook