check out the new remote control Jockey Wheel SmartBar Canegrowers rearview170 Cobb Grill Skid Row Recovery Gear Caravan Industry Association of Australia
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Sullage Hose Carriers


Senior Member

Status: Offline
Posts: 188
Date:
Sullage Hose Carriers


I've just fitted two PVC pipes to the back of my van to carry our grey water hoses.

Nothing new about that as people have been doing that for years but mine are a little different in that I fitted the ends with "screw on" fittings both ends so that it can easily be hosed through for cleaning to prevent any odour build up.

Had to go across the back instead of under the van due to articulation problems at the back involving our steep drive way when backing in.

With the left over piece of pipe I made a cylinder for carrying awning & mat pegs.

Hopefully it will make things a little easier and prevent the hoses from cracking which happened when wound up in a bag.

Cheers,  John

Sullage Pipe Carriers.jpg

 

 

 



__________________


Guru

Status: Offline
Posts: 720
Date:

I am thinking of doing the same. Have to figure balances etc before I do.

Neat looking job

Safe travels

__________________

P B Crockart EX RAAF Electrician,

Aircraft Avionics tech. Senior high school teacher.

Live long and Prosper



Guru

Status: Offline
Posts: 863
Date:

This is the way I did mine, 2- 5 mtr water hose,s  and 2 - 5 mtr sullage hoses drilled holes in the bottom of the 40mill poly pipe one  end for drainage ,does the job nicely.image.jpg



-- Edited by Olley46 on Wednesday 29th of October 2014 01:28:30 PM

Attachments
__________________


Guru

Status: Offline
Posts: 2608
Date:

I wind my 2 lengths of sullage hose into separate large rolls which are about 2ft across and tie them in 2 places with short lengths of cord I keep for the purpose. They then get dumped on a wire rack that our 'van manufacturer put on between the draw bar. I keep the jockey wheel and satellite dish legs here as well. Never blown or jumped off and Ive driven over some pretty rough WA dirt roads. I also make sure I put plenty of hot water down a sink hole when in a caravan park - no sludge or smell in pipes - always clean.

As an aside, I paid $2 for a plastic connector (For connecting 2 hoses together) from Bunnings. When I roll my water hoses (I carry 2) I connect both ends together and then use pre-cut lengths of velco to tie them neatly together. I can them keep them in my ute with no residual water leaking out of them. I splashed (yes - pun intended) out and bought 3 of these $2 connectors in case I ost one and as theyre so small, they are kept in the cutlery drawer. Ive also been in a C/P where the taps were so far apart, that it was necessary to join the two water hoses

__________________

Cheers Bruce

 

The amazing things you see when nomading Australia



Senior Member

Status: Offline
Posts: 291
Date:

I have a heavy duty wire rack under the rear tyre and a storage box which I just feed the hose into wherever it goes . It's easy to push in and stays put .
We have four outlets including the washing machine so the sullage hose has several tee pieces which I connect without clips just pushed together works well and gives me the ability to shift and move things around when needed .
Dhutime



-- Edited by Dhutime on Tuesday 2nd of December 2014 12:14:59 AM

__________________

Keep your eyes open so you can see where you are heading



Guru

Status: Offline
Posts: 1772
Date:

We have a Coromal semi off road which is a little higher off the ground than the normal van. I have attached 4 50x50 cm wire baskets on the off side either side of the dual wheels. Here we store our hoses, and our firewood, plus any other odds and ends etc. Free up a lot of space in our boot area.
Costs $10 all up, as the baskets were from recycle depots.
Jay&Dee


__________________


Guru

Status: Offline
Posts: 4238
Date:

Happy Camper wrote:

I've just fitted two PVC pipes to the back of my van to carry our grey water hoses.

Nothing new about that as people have been doing that for years but mine are a little different in that I fitted the ends with "screw on" fittings both ends so that it can easily be hosed through for cleaning to prevent any odour build up.

Had to go across the back instead of under the van due to articulation problems at the back involving our steep drive way when backing in.

With the left over piece of pipe I made a cylinder for carrying awning & mat pegs.

Hopefully it will make things a little easier and prevent the hoses from cracking which happened when wound up in a bag.

Cheers,  John

Sullage Pipe Carriers.jpg

 

 

 


 Wonder if they r very heavy



__________________


Guru

Status: Offline
Posts: 848
Date:

I just made use of our two spare wheels on the back, just coiled the sullage hoses and put inside the rim, they are held in with a plastic hub cap. One in each rim, the hoses are 5mt long each.

PIC_0355.jpg



-- Edited by madaboutled on Monday 6th of February 2017 04:46:01 PM

Attachments
__________________

Steve, Di & Ziggy We named our Motorhome "Roadworx" because on the road works "On The Road Again"
Ford Transit with 302 Windsor V8 conversion, C4 Auto, 9 Inch Ford Diff All Lighting L.E.D., 260 Amp/h AGM, 530 Watt Solar + Kipor Backup Gen.



Guru

Status: Offline
Posts: 1545
Date:

This is where we put ours, already made for them.



Attachments
__________________

Jeff & Rae travelling in a motorhome

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook