check out the new remote control Jockey Wheel SmartBar Canegrowers rearview170 Cobb Grill Skid Row Recovery Gear Caravan Industry Association of Australia
Members Login
Username 
 
Password 
    Remember Me  
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Electrical wiring help
Post Info TOPIC: Electrical wiring help
aussietraveller


Guru

Status: Offline
Posts: 2070
Date:
Electrical wiring help
Permalink  

We have a rear view camera on the van which is hard wired and uses RCA plugs to connect to the tug but I am constantly having trouble with this connection so I am thinking about running wires from van and tug through the 12 pin plug do you think there will be any issues with this or is there a better way to do this.

 

Thanks                                    



__________________

Life was meant to be enjoyed Australia was meant to be explored

Happily doing both to the Max.

 

 

Life is like a camera, focus on what's important & you will capture it every Time  

 

 
KFT


Guru

Status: Offline
Posts: 2437
Date:
Permalink  

I understand that has been done.
If you have spares in the 12 pin preferably away from powered connections or at least insulated from them with neutral cure silicone you should be ok.

If you want to go to the expense there are weatherproof signal connectors available. Have a look at Jaycar

frank

__________________

Avagreatday.

Kathy and Frank currently at Home near Quirindi NSW
Olley46


Guru

Status: Offline
Posts: 863
Date:
Permalink  

You can bye what they call a waza cable , it has bigger fittings than the standard camera lead,similar to a small trailer connector,check this pic out, you get two fittings that this cable connects to and your fittings fit into them as well.

Lance Cimage.jpg



-- Edited by Olley46 on Thursday 29th of May 2014 07:19:13 PM

Attachments
__________________
KFT


Guru

Status: Offline
Posts: 2437
Date:
Permalink  

that looks like a good bit of kit.

any chance of a pic of the other bits? OR where can I see them online

thanks
frank

__________________

Avagreatday.

Kathy and Frank currently at Home near Quirindi NSW
Olley46


Guru

Status: Offline
Posts: 863
Date:
Permalink  

Hi Frank 

             I will take a pic tomorrow a bit dark here now.

Lance C



__________________
justcruisin01


Guru

Status: Offline
Posts: 4206
Date:
Permalink  

aussietraveller wrote:

We have a rear view camera on the van which is hard wired and uses RCA plugs to connect to the tug but I am constantly having trouble with this connection so I am thinking about running wires from van and tug through the 12 pin plug do you think there will be any issues with this or is there a better way to do this.

 

Thanks                                    

 Had a similar problem with the rca's. I run the 12 pin flat plug & I do have some circuits doubbled as in elect brakes as I had the small terminal of a 7 pin burn a bit.

also doubbled the earth & access for the van fridge etc, now no probs.

With most of the 12 pin in use I fitted a 7pin male & female  & run the power + & - along with the video + & - through this plug. It also eliminated some electrical interferance from the elect brakes.There is still enough room that I can connect the audio as well should I decide to at a later date.

JC



-- Edited by justcruisin01 on Friday 30th of May 2014 04:58:53 AM

__________________

 

 

Be your self; there's no body better qualified !                    "I came into this world with nothing , I still have most of it"

 

JC.

 


 

                                             

                

    

                          

spinjohn


Member

Status: Offline
Posts: 15
Date:
Permalink  

KFT & aussietraveler check out the wozo cable from safetydave.

I have this for my rear view camera and have not had any issues as they are water proof.


safetydave.com.au/reversing-camera-kits/sd-quad-rear-vision-kit/

John

__________________

Safe travels and thanks. John & Pam
Olley46


Guru

Status: Offline
Posts: 863
Date:
Permalink  

More picks Frank

                       The socket that the woza lead goes into has about one meter of lead,that is where your camera lead joins

Lance Cimage.jpgimage.jpgimage.jpgimage.jpgimage.jpg

 



Attachments
__________________
woolman


Guru

Status: Offline
Posts: 515
Date:
Permalink  

I always carry a can of contact cleaner. Had same problem until started spaying connectors with the contact cleaner into the plugs and sockets. Gets a bit of corrosion which the camera reception does not like.

 

Neil



__________________
KFT


Guru

Status: Offline
Posts: 2437
Date:
Permalink  

Hi Lance,
many thanks for the pics, much appreciated

very neat looking install. think I will go that way too.

frank

__________________

Avagreatday.

Kathy and Frank currently at Home near Quirindi NSW
aussietraveller


Guru

Status: Offline
Posts: 2070
Date:
Permalink  

Thanks all I knew I could count on our forum members for good sound advice, just hope I can get the bits in longreach which is our next large town on the trip, Thanks heaps winkwinkwinkwinkwinkwinkwinkwink



__________________

Life was meant to be enjoyed Australia was meant to be explored

Happily doing both to the Max.

 

 

Life is like a camera, focus on what's important & you will capture it every Time  

 

 
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Click here for the Grey Nomads website -> The Grey Nomads Forum -> Techies' Corner -> Electrical wiring help
Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook