check out the new remote control Jockey Wheel SmartBar rearview170 Beam Communications SatPhone Shop Topargee products Enginesaver Low Water Alarms
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: SUBURBAN HOT WATER SERVICE - PROBLEM


Veteran Member

Status: Offline
Posts: 49
Date:
SUBURBAN HOT WATER SERVICE - PROBLEM


My suburban hot water service has reduced water pressure. I have full pressure when using cold water?
The hot water pressure is only half of what it used to be. Water temperature is ok. There is also a loud whistling noise coming from the taps when using the hot water.
Can anybody help?.

Rheo (John)



__________________

John'o



Guru

Status: Offline
Posts: 1482
Date:

Hi John,

All I can suggest is phone Casey's RV at Bundaberg.I was up there recently to have a Suburban fitted because my old Carver was leaking.To cut a long story short they replaced a valve on my Carver instead of changing the unit $100 instead of $1500.

They were very helpful and I am sure a call might get an answer.

Good luck.Cheers

Trevor



__________________

 

 

 

 

Safe Travels



Master (of Mischief)

Status: Offline
Posts: 10942
Date:

Rheo47 wrote:

My suburban hot water service has reduced water pressure. I have full pressure when using cold water?
The hot water pressure is only half of what it used to be. Water temperature is ok. There is also a loud whistling noise coming from the taps when using the hot water.
Can anybody help?.

Rheo (John)


 I am no expert but I think it would have something to do with the pump, is the pump electric?

have you checked for leaks?   or maybe air getting into the system.

as Yuglamron suggests, get to a suburan dealer and have it checked.



__________________

 

                                 



Guru

Status: Offline
Posts: 2206
Date:

John

Suggest you check the pressure relief valve (hissing problem - is it over pressurising??? - ours has a small water discharge almost every hot/cold cycle from dischage tube).

Also take out the anode if you haven't recently and check it and you can also see if there is any sludge corrosion in/coming out of the tank. If you find sludge/corrosion it may have moved into pipes also.

Look for simple things first, ie it worked before,,, why not now?



__________________

Why is it so? Professor Julius Sumner Miller, a profound influence on my life, who explained science to us on TV in the 60's.



Guru

Status: Offline
Posts: 2206
Date:

John missed the point to check the water flow from the pump TO the tank, the pipe/hose may be partially blocked. Cheers Baz


__________________

Why is it so? Professor Julius Sumner Miller, a profound influence on my life, who explained science to us on TV in the 60's.



Veteran Member

Status: Offline
Posts: 49
Date:

Found the problem guys. Seems my Carbon/siver water filter had a problem and let the carbon granules into the main water line. The particles blocked the non return valve and stuffed the rubber seal, causing decreased water pressure. Replaced the valve ($27) with a new one and hey presto problem solved. Full water pressure and plenty of hot water, NO WHISTLING.
For those that responcded to my cries for help. Thanks heaps.

Rheo

__________________

John'o

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
Purchase Grey Nomad bumper stickers Read our daily column, the Nomad News The Grey Nomad's Guidebook