Hi
If i use this ,https://www.telstat.com.au/wp-content/uploads/2020/11/Opek-CX-201U-2-way-antenna-Switch.jpg, would i be able to then switch between my 3dbi and 6dbi aerials?
Thank you
Bicyclecamper said
08:51 PM Dec 22, 2022
I just swap the tops of my aerials. I have a 4db, a 9db, and a 15db, so swap them per requirement. The 15db is adjustable down to 12db, but I just leave it at 15.
-- Edited by Bicyclecamper on Thursday 22nd of December 2022 08:52:52 PM
Mike Harding said
11:32 PM Dec 22, 2022
Yes, but it would be an utterly pointless exercise.
I just swap the tops of my aerials. I have a 4db, a 9db, and a 15db, so swap them per requirement. The 15db is adjustable down to 12db, but I just leave it at 15.
-- Edited by Bicyclecamper on Thursday 22nd of December 2022 08:52:52 PM
Yes, but it would be an utterly pointless exercise.
Don't waste your money.