Hi all have a thetford N604M.3F which works fine on 240 power & Battery when driving but on gas it ignights and gets cold then when up to temp it will not restart and everything defrosts turn to high & it freezes every thing. Had gas checked & all cleaned & pilot flame stays on but not getting cold.Thetford said need aftermarket kit to solve problem of the fridge as it is a fault in the fridge but at my cost not theirs Any ideas please.
Tony Bev said
11:30 AM Sep 21, 2020
Welcome to the forum, Ian52
I do not have that model fridge, so I can not help you
As not many people come to this part of the forum, it may pay to copy and paste your question, on the Techies part of the forum
I for one, would be interested to know what a Thetford after-market kit was
Ian52 said
03:01 PM Sep 21, 2020
Thanks Tony. How do you post it on the techs site please
Tony Bev said
03:50 PM Sep 21, 2020
Hi Ian52
The easiest way have I found, (I am on a PC)
1. Right click on the TAB at the very top of the screen, and select Duplicate Tab
You now have 2 tabs exactly the same open to you
2. On the second Tab click on The Grey Nomads Forum - pic below
3. Click on Techies Corner - pic below
4. On right side of screen click on Start A New Topic - pic below
5. Then just copy and paste the subject, and question, from the original TAB, and then submit - pic below
If I have left anything out, then hopefully someone will come along and say so
I do not have that model fridge, so I can not help you
As not many people come to this part of the forum, it may pay to copy and paste your question, on the Techies part of the forum
I for one, would be interested to know what a Thetford after-market kit was
Hi Ian52
The easiest way have I found, (I am on a PC)
1. Right click on the TAB at the very top of the screen, and select Duplicate Tab
You now have 2 tabs exactly the same open to you
2. On the second Tab click on The Grey Nomads Forum - pic below
3. Click on Techies Corner - pic below
4. On right side of screen click on Start A New Topic - pic below
5. Then just copy and paste the subject, and question, from the original TAB, and then submit - pic below
If I have left anything out, then hopefully someone will come along and say so
Hope that this info is useful