Hi , has any one suffered a warped front boot lid on a Coromal Excel 542, Looking at ways to hold down the bottom corners of the lid.
Thanks
Bob.
JayDee said
09:32 AM Apr 30, 2020
We have a Coromal 22ft and we had Coromal replace the front boot lid as it was cracked and sliding all over the boot opening.
Jay&Dee
ABNER said
02:34 PM Aug 19, 2020
ABNER wrote:
Hi , has any one suffered a warped front boot lid on a Coromal Excel 542, Looking at ways to hold down the bottom corners of the lid.
Thanks
Bob.
After a bit of thought, I decided to fix a couple of Snap type Bonnet pins to the lid on each corner. The pins were not long enough so I drilled and tapped a couple of 3/8 bolts to extend them. Just did 3500klms and they worked great. so not a bad modification and easy to use.
Hi , has any one suffered a warped front boot lid on a Coromal Excel 542, Looking at ways to hold down the bottom corners of the lid.
Thanks
Bob.
We have a Coromal 22ft and we had Coromal replace the front boot lid as it was cracked and sliding all over the boot opening.
Jay&Dee