I have installed a DC to DC charger however it doesn't seem to charge the auxiliary battery to its full capacity but is showing 13.2 volts. The charger is a voltage 30amp which is at the back of my tub charging directly to the battery in an ark pak (not through the ark pak 4amp charger). I have driven from Victoria to Queensland and although the charge is showing 13.20 volts when I turn the ark pak on, as there is no need to have it running all the time, it is showing only 80% charged. I have just purchased a new 125amp battery and aligned the settings through the ark pak, and I am worried I will damage the battery if it continues to under charge. if anyone can shed light on what is going on please let me know.
Martin
newhorizons said
03:26 PM Jun 23, 2018
Martin, you might be better to post this in the general forum... Not everyone comes here.
Martin_QLD said
07:43 AM Jun 24, 2018
Yes I didn't look before I submitted my question, I have put it on tech questions since then however I did have a solo question. Is anyone going to Tipooburra in the near future, I am heading there in a few weeks from Queensland and looking for any information contacts etc
Cheers
Martin
I have installed a DC to DC charger however it doesn't seem to charge the auxiliary battery to its full capacity but is showing 13.2 volts. The charger is a voltage 30amp which is at the back of my tub charging directly to the battery in an ark pak (not through the ark pak 4amp charger). I have driven from Victoria to Queensland and although the charge is showing 13.20 volts when I turn the ark pak on, as there is no need to have it running all the time, it is showing only 80% charged. I have just purchased a new 125amp battery and aligned the settings through the ark pak, and I am worried I will damage the battery if it continues to under charge. if anyone can shed light on what is going on please let me know.
Martin
Cheers
Martin