Hi all I'm looking for advice on how to remove the top plastic mouldings from a 2007 Jayco Conquest. Any assistance would be appreciated
PeterD said
10:52 PM Jul 25, 2016
Which particular moulds are you referring to?
Jimbo48 said
09:03 AM Jul 26, 2016
Hi Peter it's the mouldings that goes across the top of the Motorhome at the rear. It has two lights in it and a stop light in the middle. A tree branch ran out and hit it (well that's my story anyway)
jules47 said
11:25 AM Jul 26, 2016
And a good story it is too Jimbo48!!!
jules47 said
11:27 AM Jul 26, 2016
And a good story it is too Jimbo48!!!
spida said
02:12 PM Jul 26, 2016
I found when I undid the screws that held the lower lights on (needed to change a bulb) that those screws also held the moulding on. Maybe try that.
-- Edited by spida on Tuesday 26th of July 2016 02:12:18 PM
Hi all I'm looking for advice on how to remove the top plastic mouldings from a 2007 Jayco Conquest. Any assistance would be appreciated
I found when I undid the screws that held the lower lights on (needed to change a bulb) that those screws also held the moulding on. Maybe try that.
-- Edited by spida on Tuesday 26th of July 2016 02:12:18 PM