We have a 2012 Landcruiser which has a cargo barrier made by Milfords . I am wanting to put drawers etc in but this cargo barrier has straps coming down to the floor which makes it impossible just wondering if anyone has made changes and how they did it .
Hey Jim said
02:42 PM Jan 29, 2016
Hi there J Brinks,
What model 200 do you have first.
I have a 2012 GX no straps Milford barrier that is positioned behind second row, or can be placed behind the drivers seat using extended steel straps supplied, using the same mounting holes. I chucked the second row seats to the st.... house. saves another 100kg.
We have a custom platform floor installed + an Orr's fridge slide with aluminium boxed walls surrounds.
Jim
RodLainie said
03:05 PM Jan 29, 2016
Hi jbrinks
We put draws in then cut the barrier down with a grinder then screwed it to the top of the draws.
hope this is of some help
Rod
jbrinks said
09:40 PM Jan 29, 2016
Our land cruiser is a GXL model. We have seen an earlier model 2010 which attached it to where the grab handles were but dont think we can do this . Thanks fir the suggestions so far will look into them
deverall11 said
01:49 PM Jan 30, 2016
jbrinks, check out what the lads have done on the landcruiser forum LCOOL.ORG.
We have a 2012 Landcruiser which has a cargo barrier made by Milfords . I am wanting to put drawers etc in but this cargo barrier has straps coming down to the floor which makes it impossible just wondering if anyone has made changes and how they did it .
Hi there J Brinks,
What model 200 do you have first.
I have a 2012 GX no straps Milford barrier that is positioned behind second row, or can be placed behind the drivers seat using extended steel straps supplied, using the same mounting holes. I chucked the second row seats to the st.... house. saves another 100kg.
We have a custom platform floor installed + an Orr's fridge slide with aluminium boxed walls surrounds.
Jim
We put draws in then cut the barrier down with a grinder then screwed it to the top of the draws.
hope this is of some help
Rod
Our land cruiser is a GXL model. We have seen an earlier model 2010 which attached it to where the grab handles were but dont think we can do this . Thanks fir the suggestions so far will look into them