Stop the water spluttering and spurting by priming the hose before you connect it to the van
hako said
05:58 PM May 1, 2015
Too easy!.....a great idea and so simple.
Good luck.
Peterpan said
09:40 PM May 1, 2015
Great idea, tried it and it works.
Thanks
PeterD said
08:02 PM May 2, 2015
Either do that or connect the hose, turn the park tap on and then bleed the vans system by turning on the external tap until the air is out of the system.
Moby58 said
10:12 PM May 13, 2015
I connect the hose, open the relief valve on the hot water system until the water flows, then close it. . (always drain the HWS after each trip)
Stop the water spluttering and spurting by priming the hose before you connect it to the van
Good luck.
Great idea, tried it and it works.
Thanks