I am looking for some "Embossed Aluminium" Sheet 0.8 or 1 mm. thick. I can get the 1.6 + mm. Treadplate (Propeller or 5 bar Plate patterns etc) aluminium no probs here in Perth. But I need something a thinner at 1 mm. or 0.8 mm. Haven't be able to locate an outlet in Perth that stocks the Embossed Sheet.
Any Ideas I, have tried "Capral" and a few other Aluminum places but no joy
I need a piece 2400x1200. Propeller,5bar, pattern.
Regards
Mike
-- Edited by elliemike on Saturday 17th of January 2015 06:32:39 PM
justcruisin01 said
07:34 PM Jan 17, 2015
I recently got a sheet from bunnings not very large maybe about 900x600.
JC.
elliemike said
09:22 PM Jan 17, 2015
justcruisin01 wrote:
I recently got a sheet from bunnings not very large maybe about 900x600.
JC.
Yep they have that size but I need the 2400x1200
Cruising Cruze said
09:42 PM Jan 17, 2015
I think that any sheetmetal workshop could help you further Mike
Good luck with the hunt
Cheers John
elliemike said
04:20 PM Jan 18, 2015
Cruising Cruze wrote:
I think that any sheetmetal workshop could help you further Mike
Good luck with the hunt
Cheers John
Thats why I am asking here Iv'e been around a few but no luck so far.
banjo said
04:39 PM Jan 18, 2015
I bought my last lot (2 full sheets) from Capral in Welshpool, as said it's called Propeller plate and comes only in the very shiny version I think.
There's another aluminium mob in Bayswater Ullrich King st Bayswater.
Saw some in Mandurah at A1 Salvage only last week. Just off Gordon Road. Maybe give them a call if considering a visit, just to be sure. Think they were full sheets.
elliemike said
08:30 PM Jan 18, 2015
banjo wrote:
I bought my last lot (2 full sheets) from Capral in Welshpool, as said it's called Propeller plate and comes only in the very shiny version I think.
There's another aluminium mob in Bayswater Ullrich King st Bayswater.
Saw some in Mandurah at A1 Salvage only last week. Just off Gordon Road. Maybe give them a call if considering a visit, just to be sure. Think they were full sheets.
Already been to Capral they have the 1.6 mm sheet but I am after the 1mm or 0.8mm thick stuff. It has to fit into a trim and 1 mm will go in with a bit of doctoring.
I will try them in Bayswater.
Thanks for the tips
Mike
elliemike said
10:14 AM Jan 24, 2015
elliemike wrote:
banjo wrote:
I bought my last lot (2 full sheets) from Capral in Welshpool, as said it's called Propeller plate and comes only in the very shiny version I think.
There's another aluminium mob in Bayswater Ullrich King st Bayswater.
Saw some in Mandurah at A1 Salvage only last week. Just off Gordon Road. Maybe give them a call if considering a visit, just to be sure. Think they were full sheets.
Already been to Capral they have the 1.6 mm sheet but I am after the 1mm or 0.8mm thick stuff. It has to fit into a trim and 1 mm will go in with a bit of doctoring.
I will try them in Bayswater.
Thanks for the tips
Mike
Thanks for the info Banjo. Ullrich have what I want. Might get over there next week.
Regards
Mike
elliemike said
07:39 PM Jan 27, 2015
Just picked up a 1200mmx2400 sheet of 0.9 five bar.
$65:00
I am looking for some "Embossed Aluminium" Sheet 0.8 or 1 mm. thick. I can get the 1.6 + mm. Treadplate (Propeller or 5 bar Plate patterns etc) aluminium no probs here in Perth. But I need something a thinner at 1 mm. or 0.8 mm. Haven't be able to locate an outlet in Perth that stocks the Embossed Sheet.
Any Ideas I, have tried "Capral" and a few other Aluminum places but no joy
I need a piece 2400x1200. Propeller,5bar, pattern.
Regards
Mike
-- Edited by elliemike on Saturday 17th of January 2015 06:32:39 PM
I recently got a sheet from bunnings not very large maybe about 900x600.
JC.
Yep they have that size but I need the 2400x1200
Good luck with the hunt
Cheers John
Thats why I am asking here Iv'e been around a few but no luck so far.
There's another aluminium mob in Bayswater Ullrich King st Bayswater.
Saw some in Mandurah at A1 Salvage only last week. Just off Gordon Road. Maybe give them a call if considering a visit, just to be sure. Think they were full sheets.
Already been to Capral they have the 1.6 mm sheet but I am after the 1mm or 0.8mm thick stuff. It has to fit into a trim and 1 mm will go in with a bit of doctoring.
I will try them in Bayswater.
Thanks for the tips
Mike
Thanks for the info Banjo. Ullrich have what I want. Might get over there next week.
Regards
Mike
$65:00
Thanks for your input everyone.
Mike