https://farm6.staticflickr.com/5502/10474490106_7a55252c6e.jpg
H'mmmmm,not to sure about this guide.Non of them seem to fit my fuse holder I think some of the ratings aren't quite right either.....cheers Peter
You can always tell an Auto Sparky by the burn marks on his spanners..
03_troopy wrote:You can always tell an Auto Sparky by the burn marks on his spanners..
How else can ya find out if it is alive..
oldbobsbus wrote:03_troopy wrote:You can always tell an Auto Sparky by the burn marks on his spanners.. How else can ya find out if it is alive..
Good question Bob, I use to spit on the ends of my fingers and touch the wires, but couldnt find a standard for that one
Safe travels
Found this in a fuse holder the other day,
Old Crofter wrote:Found this in a fuse holder the other day,
It used to be the aluminium lining from a packet of cigarettes, years gone by.
Larry
Looks like one of mine...slow blow...very slow blow.. ,,cheers Peter.
Phil C wrote:oldbobsbus wrote:03_troopy wrote:You can always tell an Auto Sparky by the burn marks on his spanners.. How else can ya find out if it is alive.. Good question Bob, I use to spit on the ends of my fingers and touch the wires, but couldnt find a standard for that oneSafe travels
Hay Phil, you didn't happen to know a old wire man in the SEC he did the very same thing with 240V AC AND DC to find the isolated circuit
Cheers
Norm
https://farm6.staticflickr.com/5502/10474490106_7a55252c6e.jpg
H'mmmmm,not to sure about this guide.Non of them seem to fit my fuse holder
I think some of the ratings aren't quite right either.....cheers Peter
-- Edited by 2foot6 on Tuesday 14th of October 2014 10:12:21 AM
brian
You can always tell an Auto Sparky by the burn marks on his spanners..
How else can ya find out if it is alive..




Good question Bob, I use to spit on the ends of my fingers and touch the wires, but couldnt find a standard for that one

Safe travels
Found this in a fuse holder the other day,
It used to be the aluminium lining from a packet of cigarettes, years gone by.
Larry
Looks like one of mine...slow blow...very slow blow..
,,cheers Peter.
brian
Hay Phil, you didn't happen to know a old wire man in the SEC he did the very same thing with 240V AC AND DC to find the isolated circuit
Cheers
Norm