Any Glazier will cut a piece of mirror to suit. Ozjohn.
-- Edited by ozjohn on Monday 24th of February 2014 10:15:11 AM
hako said
02:19 PM Feb 23, 2014
This link has them for $16.80 ea incl postage - they're ORA brand. If you get them cut they need to be very precise as they clip into a plastic seal all they way round....double sided tape won't work. Repco and Supercheap usually carry replacement heads of different shapes/sizes which whilst not exact copies they are similar. You can be lucky and but them complete on Gumtree or similar for under $40 a pair. http://www.oraproducts.com.au/spareparts.htm Good Luck
kiwijims said
03:01 PM Feb 23, 2014
G'day hako,
You're dead right about the mirror having to be the exact size,
they are only held in by the surround rubber, and that's only around 5-7mm in depth
I think I may have to make a template of the old mirror. as it's only cracked in two and then take it into Repco or ( not so ) Cheap,
just to see if they have one the same.
I see that Camec are selling them complete new for around $138.00 ea
So, as I bought two of them from the Sunday Markets this morning for $20.00 I am pretty well ahead at present.
You're correct PeterD they are the Camec brand, I rang them today about replacement glass,
You might have guessed the answer.... "Nup" can't buy mirrors, but they do have new Heads at $49.00 each.
I have emailed the Mob you mentioned Denis, just to see if the ones they have are the exact size,
which, by the way is 210mm wide x 135mm high,
so far they haven't replied.
kiwijims.
Cupie said
09:51 AM Feb 28, 2014
I had the local glass place cut one for me.
Just took the mirror head down to him & he cut & fitted it while I waited.
Can't remember what it cost but I think around $10 ..
G'day All,
Could anyone tell me where I can get replacement mirror glass for my extension mirrors ?
Glass for This is type of mirror x 2 is what I require........
Thanks kiwijims
Any Glazier will cut a piece of mirror to suit.
Ozjohn.
-- Edited by ozjohn on Monday 24th of February 2014 10:15:11 AM
This link has them for $16.80 ea incl postage - they're ORA brand.
If you get them cut they need to be very precise as they clip into a plastic seal all they way round....double sided tape won't work.
Repco and Supercheap usually carry replacement heads of different shapes/sizes which whilst not exact copies they are similar. You can be lucky and but them complete on Gumtree or similar for under $40 a pair.
http://www.oraproducts.com.au/spareparts.htm
Good Luck
G'day hako,
You're dead right about the mirror having to be the exact size,
they are only held in by the surround rubber, and that's only around 5-7mm in depth
I think I may have to make a template of the old mirror. as it's only cracked in two and then take it into Repco or ( not so ) Cheap,
just to see if they have one the same.
I see that Camec are selling them complete new for around $138.00 ea
So, as I bought two of them from the Sunday Markets this morning for $20.00 I am pretty well ahead at present.

Cheers kiwijims
They look more like Ausie Truck mirrors to me or the Camec direct copy ones.
You might have guessed the answer.... "Nup" can't buy mirrors, but they do have new Heads at $49.00 each.
I have emailed the Mob you mentioned Denis, just to see if the ones they have are the exact size,
which, by the way is 210mm wide x 135mm high,
so far they haven't replied.
kiwijims.
I had the local glass place cut one for me.
Just took the mirror head down to him & he cut & fitted it while I waited.
Can't remember what it cost but I think around $10 ..
.. no problems .... G