-- Edited by ozjohn on Sunday 4th of August 2013 03:48:23 PM
Crashtac said
05:33 PM Aug 4, 2013
G'Day just wondering if anyone has an EZILIFT weight distibution hitch they want to get rid of, I first bought mine when I had a 80 series cruiser with a 2 inch lift kit in it now I have a 100 series with standard height suspension and my hitch is too low. I would be willing to buy or swap for a hitch that is for a standard height vehicle
Cheers Andrew
Cruising Cruze said
07:13 PM Aug 4, 2013
Can't you turn your hitch around so you get it 2 '' higher just an tough,but who am I
Thats totally different from the one I have thanks anyway John
PeterD said
06:51 AM Aug 5, 2013
Which shank do you have? You can see a selection of them on this page - just scroll down. If you have the Hi-Low shank you can turn it up the other way. It is shown both ways in the installation instructions.
If you need a different shank to the one you have then they are available separately, no need to get a complete replacement set.
Crashtac said
07:42 AM Aug 5, 2013
Thanks for that Peter, I have that coupling and I never had those instructions, sort of forgot to check ezilift web site. But thanks again shouldn't be too hard to set up.
Cheers Andrew
Crashtac said
03:59 PM Aug 6, 2013
I said it shouldnt be too hard too set up, what famous last words they are. If I put the hitch in with the shaft down it was way to low, if I put it in with the shaft up it was way to high, I had to go to a local engineering shop and get them to drill extra holes in the shaft to give me the adjustment I need. But it worked now van and cruiser sit just right.
Thanks again for the advice from other members
Cheers Andrew
Post deleted
-- Edited by ozjohn on Sunday 4th of August 2013 03:48:23 PM
G'Day just wondering if anyone has an EZILIFT weight distibution hitch they want to get rid of, I first bought mine when I had a 80 series cruiser with a 2 inch lift kit in it now I have a 100 series with standard height suspension and my hitch is too low. I would be willing to buy or swap for a hitch that is for a standard height vehicle
Cheers Andrew
Can't you turn your hitch around
so you get it 2 '' higher
just an tough,but who am I
Cheers John
Which shank do you have? You can see a selection of them on this page - just scroll down. If you have the Hi-Low shank you can turn it up the other way. It is shown both ways in the installation instructions.
If you need a different shank to the one you have then they are available separately, no need to get a complete replacement set.
Thanks for that Peter, I have that coupling and I never had those instructions, sort of forgot to check ezilift web site. But thanks again shouldn't be too hard to set up.
Cheers Andrew
Thanks again for the advice from other members
Cheers Andrew