I reinstalled windows 7 home premium on my pc, acer desktop,quad core i7
and some how in the mix the c drive dissapeared and i managed to get it back, but since then i get sometimes a blue screen dump thingy on the monitor.. dam , i also when reinstalling windows i coulndt activate the product key, even though ive done it with other pcs, ie i bout windows 7 home premium on cd etc.. as you dont get cds when you by pcs now..
god this is confusing some times...
so now i got to work out why its crashing and how to activate the product key, or get a new one maybe???
any one else confused, and i know what im doing!!
Happywanderer said
11:22 PM Dec 16, 2011
I know nothing about computers milo, but if wombat comes on he might be able to help you.
yeoeleven said
10:34 AM Dec 17, 2011
Milo,
If you have just reinstalled windows I would format the drive and start again, you have little to lose in the programming because it would have been wiped out previously.
I would pay very close attention to the instruction screen when deciding actually which drive to reinstall windows on, paying careful attention to any partitions that may be already there and making sure that the previous installation was properly removed by formatting.
The problem outlined suggests a major installation problem and would be better totally removed by formatting. I would also make sure that the product key is properly inserted.
The new computers now rarely come with the installation CD and that information has to be downloaded from the manufacturer's site and burned onto a CD.
John
milo said
12:46 PM Dec 17, 2011
thanks john, i got windows reinstalled, but it still didnt like the product key, guess ill keep trying
bill12 said
04:23 PM Dec 17, 2011
Was it an original orsomething you bought off someone else. Bill Gates has eyes everywhere, and when you use windows update, it downloads your configuration as you use it. They try to stop you using pirate products, and if you ask them they will try to charge you to fix the problem that they started.Microsoft has a lot to answer for. Bill
blaze said
07:23 PM Dec 17, 2011
my money is on a faulty memory chip, pull them out and reseat them, try different slots. Over the years I have seen countless times were a faulty memory stick has corrupted a fresh install. I used to build and sell computers when there was a bit of money in it but that went west when department stores started selling them and their customers wanting free product support from small indepentant sellers that offered service. This sort of problem is designed to make you tear your hair out milo, stick with it. cheers blaze ps can or does any one still work with DOS or can remember how to set things up in DOS
milo said
10:09 PM Dec 17, 2011
i talked with hardley normals (harvey norman) today and they said bring it in as could be a hard drive failure happening ,so ill take it down during the week when the tech guys are there, at least i have my laptop ..
thanks all
PeterD said
01:25 AM Dec 18, 2011
Back in the good old days, when you installed Windows you had to phone up to activate your installation. While you were on the phone they asked you for your key, then fed that into their system which produces another. You then had to type that one in as well. These days with online activation that new code is fed down the line and inserted for you. It is that new code you need to continue if you don't wish to ring up.
To activate your Win 7 you ring up M$ and tell them what went on and quote your original code to them.
For those who wish to know their current activation code you can retrieve it with Belarc Advisor. Go to http://www.belarc.com/free_download.html and download the programme. Follow the procedure in "Download Tips" to install and run it. There is a good FAQ on that page about the programme.
When you have run Belarc, use the options in the file menu of your browser to print out a copy of the results and also copy it to a file for further reference.
Under the heading "Manage all your software licenses..." you will find the software licence numbers for all your programmes that need and have them. The activation codes of M$ programmes are there as well. It will also tell you about the hardware in your computer, peripherals attached at the time of taking the scan and what programmes you have installed. I recommend everyone with a Windows computer install the programme and make a scan periodically.
hi guys, im usually pretty good on my computers..
but somethngs stuffing me around..
I reinstalled windows 7 home premium on my pc, acer desktop,quad core i7
and some how in the mix the c drive dissapeared and i managed to get it back, but since then i get sometimes a blue screen dump thingy on the monitor.. dam , i also when reinstalling windows i coulndt activate the product key, even though ive done it with other pcs, ie i bout windows 7 home premium on cd etc.. as you dont get cds when you by pcs now..
god this is confusing some times...
so now i got to work out why its crashing and how to activate the product key, or get a new one maybe???
any one else confused, and i know what im doing!!
Milo,
If you have just reinstalled windows I would format the drive and start again, you have little to lose in the programming because it would have been wiped out previously.
I would pay very close attention to the instruction screen when deciding actually which drive to reinstall windows on, paying careful attention to any partitions that may be already there and making sure that the previous installation was properly removed by formatting.
The problem outlined suggests a major installation problem and would be better totally removed by formatting. I would also make sure that the product key is properly inserted.
The new computers now rarely come with the installation CD and that information has to be downloaded from the manufacturer's site and burned onto a CD.
John
i got windows reinstalled, but it still didnt like the product key, guess ill keep trying
cheers
blaze
ps
can or does any one still work with DOS or can remember how to set things up in DOS
failure happening ,so ill take it down during the week when the tech guys are there,
at least i have my laptop ..
thanks all
To activate your Win 7 you ring up M$ and tell them what went on and quote your original code to them.
For those who wish to know their current activation code you can retrieve it with Belarc Advisor. Go to http://www.belarc.com/free_download.html and download the programme. Follow the procedure in "Download Tips" to install and run it. There is a good FAQ on that page about the programme.
When you have run Belarc, use the options in the file menu of your browser to print out a copy of the results and also copy it to a file for further reference.
Under the heading "Manage all your software licenses..." you will find the software licence numbers for all your programmes that need and have them. The activation codes of M$ programmes are there as well. It will also tell you about the hardware in your computer, peripherals attached at the time of taking the scan and what programmes you have installed. I recommend everyone with a Windows computer install the programme and make a scan periodically.
a good tip here for Windows 7 user's (BSOD)
http://www.windowsobserver.com/2010/04/26/get-a-chance-to-read-a-blue-screen-of-death-bsod/