After completing a couple of trips round Oz the front of the aluminium checker plate has become stained with red dust (mud ). How do I get it off and get the plate looking like new.
Rheo (John)
blaze said
04:47 PM Oct 17, 2010
The local truckies use a acid wash of some sort for the ali trays and fuel tanks on the trucks, dont know the name but just spray on with a squirty bottle, leave half hour and rinse off with water. Comes up like new. So mabe if you tried a place that sold truck accessories they would have it in the cleaning products. cheers blaze
jimricho said
07:42 PM Oct 17, 2010
Hi Rheo47 and welcome to the forum,
I have a camper trailer that's based on a galvanised box trailer that has red dust permeating the galvanising. I have tried to clean it up without success. I will suss out the wash you mention and try that. Sorry I can't help you but my current van has checker plate and I'm interested in any responses too
cheers,
Jim
-- Edited by jimricho on Sunday 17th of October 2010 07:43:09 PM
Brookie said
08:47 PM Oct 17, 2010
All these work depending on penetration of dirt
Alloy wheel cleaner from Supercheap or similar
Baking soda
Kero on a scoring pad
Silvo
------------
Happywanderer said
10:09 PM Oct 17, 2010
How about a good scrub with Jif, then hose it down. Works great on kitchen sinks.
Cruising Granny said
11:38 PM Oct 17, 2010
Gumption works. Wash off as much as you can with a brush to get the mud out of the crevices.
Then spread Gumption paste onto the plate, wait until it dries and buff off with dry cloth.
Cut and polish also works, but Gumption is cheaper, and quicker.
Another method is fine, dry steel wool, with no soap.
A paste of carb/baking soda may be ok. Hadn't thought about Brasso, but hey, why not.
Scourers tend to mark the soft alloy.
Acids can discolour the metal.
When I scrubbed the mould and moss off my van after the wet season, when I was preparing the surface to apply Sikaflex, I used a toothbrush for the nooks and crannies. Whatever it takes if you want a good outcome.
Years of car, and boat detailing brings out the best in me.
You should see what I do with vinegar, cotton tips and baby oil.
No, not telling!
Sheba said
11:49 PM Oct 17, 2010
Try a good Citrus-based [Orange] Household cleaner, or Bi-carb & Vinegar, or straight Ammonia. For anything stronger, Godfrey's Vacuum Cleaner outlets have a pretty good range of Truck Cleaning Products.
Cheers, Sheba.
Popeye said
07:31 PM Oct 18, 2010
A lady wrote two books how to clean. Can not remember her name or her books. If my memory without timers serves me she said use rolled up { mums old pantyhose} & cold tea.
Happywanderer said
10:01 PM Oct 18, 2010
Was her name Shannon Lush or something similiar. have seen her on the morning shows.
Sheba said
12:46 AM Oct 19, 2010
Happywanderer wrote:
Was her name Shannon Lush or something similiar. have seen her on the morning shows.
That's her Marj. She's also on the ABC once a week [or fortnight], answering phone-in queries. Can't remember which day.
Cheers,
Sheba.
Rolly said
06:40 PM Oct 19, 2010
Truck wash CT18, and/or Truck wash & polish CT20.
Several thousand penny-conscious transport drivers/owners can't all be wrong. (Have you ever thought just how much they fork out for all that fancy sign-writing?)
Always wet with water first and apply the detergent mix to the bottom edges first to prevent etching by over-concentrated detergent.
Most retail accessories places have the stuff, and every truck supplies shop too.
Wombat 280 said
04:10 PM Nov 5, 2010
Truck and boat access shops sell the CT18 good gear.
codgerswa said
07:08 PM Nov 24, 2010
Hi, use Ali Bright. Look up in Google, I think it's just what your looking for.
codgerswa said
07:10 PM Nov 24, 2010
Hi, Ali Bright is the name of the stuff that you want, look it up on google.
Rheo (John)
cheers
blaze
I have a camper trailer that's based on a galvanised box trailer that has red dust permeating the galvanising. I have tried to clean it up without success. I will suss out the wash you mention and try that. Sorry I can't help you but my current van has checker plate and I'm interested in any responses too
cheers,
Jim
-- Edited by jimricho on Sunday 17th of October 2010 07:43:09 PM
Cheers,
Sheba.
That's her Marj. She's also on the ABC once a week [or fortnight], answering phone-in queries. Can't remember which day. Cheers, Sheba.
Several thousand penny-conscious transport drivers/owners can't all be wrong. (Have you ever thought just how much they fork out for all that fancy sign-writing?)
Always wet with water first and apply the detergent mix to the bottom edges first to prevent etching by over-concentrated detergent.
Most retail accessories places have the stuff, and every truck supplies shop too.